Whether it’s engine braking, down-shifting or decelaration caused by actuating the brake lever, Brake Free’s sensory system and programming detects the subtle changes in your speed.

Brake Free filters-out the riders usual head-movement. We designed a clever algorithm that works in conjunction with our patented sensory system. This enables Brake Free to effectively act on deceleration events only.

Wet Paint SignPrintable

NORMAL-MODE // If you prefer more visibility during bright, sunny days then activating ‘normal-mode’ on your Brake Free will increase the visibile angle of the leds to approx 240º. This mode activates all 100 leds that sit in the outer ring as DRL. Initially set to a ~20% dim-setting the 100 ultra-bright leds will increase brightness to 1100NITs (max output) immediately once a decelaration event is detected.

Your parcel will be delivered by Australia Post or via courier service. Where possible, we highly recommend you choose the Registered Post option when selecting your delivery method as East Point Cleaning Supplies cannot be held liable for any loss, damage or discrepancies that occur during transit. Using this method, your parcel will be delivered during normal business hours and, upon delivery, a signature will be required. If no-one is home at the time, a card will be left in your letterbox advising you to collect your parcel from your local post office.

Wet paint signaustralia

Brake Free filters-out the riders usual head-movement. We designed a clever algorithm that works in conjunction with our patented sensory system. This enables Brake Free to effectively act on deceleration events only.

Brake Free emits a >180º visble lightspread that easily exceeds the reflective value of any hi-vis gear, plus hi-vis patches or bright coloured helmets always need an external light source to reflect light.

Brake Free is equipped with both a gyro-sensor and a accellerometer. This way Brake Free will understand its orientation and sense any forward deceleration event. We also thoroughly designed an advanced algorithm that would filter-out usual head movement. This enables Brake Free to adequately focus on deceleration which means that Brake Free will signal once the rider actuates the footbrake or brakelever but also when he/she starts down-shifting and/or lets go off the gas.

SAFETY-MODE // This mode will put the outer leds on your Brake Free in a sequential and continuous slow fading mode which draws immediate attention. Although it reacts the exact same way to any deceleration event as in Normal-mode, we did not necessarily intend that you’d ride Brake Free in this mode. Conspicuity-mode is especially useful in the unfortunate event your stuck at the side of the road with a failing motorcycle. Put your Brake Free in ‘Conspicuity-mode’ and place your helmet around 30 meters behind the motorcycle on side of the road to signal other traffic they have to manouvre around and position yourself out the way of collision.

Wet Paint Signfree

The 8-12hr long-lasting Li-ion battery makes Brake Free ‘self-powered’ and therefore the perfect companion for your daily commute or any which multi-day riding adventure.

As conventional brake lights are positioned on the bike’s rear-end, their brake signal is visible only to the first car behind you. Brake Free instead mounts to the back of your helmet which usually is the highest point on the riders silhoutte. From now on you will signal any deceleration event visible to as much as 6 cars back plus you will also significantly increase the safety padding around you.

We have selected each product that we stock making sure they all meet Eastpoint Cleaning Supplies product standards. Our range is full of quality products. We deliver Australia wide.

The 8-12hr long-lasting Li-ion battery makes Brake Free ‘self-powered’ and therefore the perfect companion for your daily commute or any which multi-day riding adventure.

Please note that you must thoroughly check your parcel for damage caused in transit PRIOR to signing for it. If the parcel is signed for and transit damage is evident, insurance is voided. Please note that whilst we take great care with packaging, East Point Cleaning Supplies cannot be held liable for any loss, damage or discrepancies that occur during transit.

If you put your helmet down for some time, Brake Free will automatically switch to ‘Active-standby’ in an effective attempt to preserve energy. While it might seem that Brake Free is turned off, its sensors are still on. Once you pickup your helmet Brake Free will automatically boot itself back up and revert to the last ride-mode selected.

Brake Free is an ultra-bright, dynamic helmet-mounted brake light with built-in, best-in-class, true-wireless brake detection. Now also available in USB-C

Riding with Brake Free instantly makes you more visible as the 100 ultra-bright leds will automatically signal any deceleration event to traffic pulling-up from behind preventing rear-end collisions.

We chose the quality of 3M VHB adhesive for our mounts to guarantee a secure installation of your Brake Free during all your adventures. 3M is well-known for the quality and reliability of their VHB tape. Once it is on, it stays on so you can focus on your ride. Let’s goooooo!

Whether it’s engine braking, down-shifting or decelaration caused by actuating the brake lever, Brake Free’s sensory system and programming detects the subtle changes in your speed.

Riding with Brake Free instantly makes you more visible as the 100 ultra-bright leds will automatically signal any deceleration event to traffic pulling-up from behind preventing rear-end collisions.

WetFloorSignOfficeworks

As conventional brake lights are positioned on the bike’s rear-end, their brake signal is visible only to the first car behind you. Brake Free instead mounts to the back of your helmet which usually is the highest point on the riders silhoutte. From now on you will signal any deceleration event visible to as much as 6 cars back plus you will also significantly increase the safety padding around you.

Brake Free filters-out the riders usual head-movement. We designed a clever algorithm that works in conjunction with our patented sensory system. This enables Brake Free to effectively act on deceleration events only.

Rest assured, you do not need to splice in to any wires on your motorcycle or go through setups via an app. Brake Free is fully self-contained and works autonomously, just power it on and ride!

Brake Free offers 3 ride modes which you can easily cycle through by a short-press of the on/off button.STEALTH-MODE Putting Brake Free in ‘stealth-mode’ activates only the centered 16 leds as DRL (daytime running light) at a ~20% dim-setting but once deceleration is detected all the 100 leds will light up bright for the highest ‘dim-to-bright contrast’ ideal for dusk/dawn and night rides. NORMAL-MODE // If you prefer more visibility during bright, sunny days then activating ‘normal-mode’ on your Brake Free will increase the visibile angle of the leds to approx 240º. This mode activates all 100 leds that sit in the outer ring as DRL. Initially set to a ~20% dim-setting the 100 ultra-bright leds will increase brightness to 1100NITs (max output) immediately once a decelaration event is detected. SAFETY-MODE // This mode will put the outer leds on your Brake Free in a sequential and continuous slow fading mode which draws immediate attention. Although it reacts the exact same way to any deceleration event as in Normal-mode, we did not necessarily intend that you’d ride Brake Free in this mode. Conspicuity-mode is especially useful in the unfortunate event your stuck at the side of the road with a failing motorcycle. Put your Brake Free in ‘Conspicuity-mode’ and place your helmet around 30 meters behind the motorcycle on side of the road to signal other traffic they have to manouvre around and position yourself out the way of collision.

Improve your visibility & improve your safety, Brake Free is an ultra-bright, dynamic helmet-mounted brake light with built-in, best-in-class, true-wireless brake detection. Now also available in USB-C Made 'BY RIDERS // FOR RIDERS' – Brake Free features a no-fuss, single-button operation with 3 ride-modes, compatible with >95% of the helmets you already own.

Wet Paint SignA4 printable

In most cases your parcel will be dispatched within 24 business hours of your payment being received and cleared, however, depending upon the delivery location and postage method selected, please allow approximately 3 to 7 business days for your parcel to arrive at an address within Australia. If by chance there is a delay in dispatching your parcel we will contact you.

Rest assured, you do not need to splice in to any wires on your motorcycle or go through setups via an app. Brake Free is fully self-contained and works autonomously, just power it on and ride!

Brake Free is equipped with both a gyro-sensor and a accellerometer. This way Brake Free will understand its orientation and sense any forward deceleration event. We also thoroughly designed an advanced algorithm that would filter-out usual head movement. This enables Brake Free to adequately focus on deceleration which means that Brake Free will signal once the rider actuates the footbrake or brakelever but also when he/she starts down-shifting and/or lets go off the gas.

WetFloorSign

As a rider you constantly change the direction of your helmet. You’ll look out to the road in front, to the sides, your telemetry system as well as your riding buddies. As a result the visible lightspread of Brake Free will not only be visible from the already generous 180º viewing angle to the back. In fact it will throw about an incredible 270º viewing angle, immensly increasing to your conspicuity as a rider. You can thank your head for that!

As conventional brake lights are positioned on the bike’s rear-end, their brake signal is visible only to the first car behind you. Brake Free instead mounts to the back of your helmet which usually is the highest point on the riders silhoutte. From now on you will signal any deceleration event visible to as much as 6 cars back plus you will also significantly increase the safety padding around you.

Riding with Brake Free instantly makes you more visible as the 100 ultra-bright leds will automatically signal any deceleration event to traffic pulling-up from behind preventing rear-end collisions.

Made 'BY RIDERS // FOR RIDERS' – Brake Free features a no-fuss, single-button operation with 3 ride-modes, compatible with >95% of the helmets you already own.

Make sure to load up on additional mounts. Our proprietary mounts allow you to quickly switch your Brake Free over to all your favorite helmets so you can always use your Brake Free when you change styles or ride 2up with a pillion rider on your travels.

The 8-12hr long-lasting Li-ion battery makes Brake Free ‘self-powered’ and therefore the perfect companion for your daily commute or any which multi-day riding adventure.

As a rider you constantly change the direction of your helmet. You’ll look out to the road in front, to the sides, your telemetry system as well as your riding buddies. As a result the visible lightspread of Brake Free will not only be visible from the already generous 180º viewing angle directed to the back. In fact it will throw about an incredible 270º viewing angle immensly increasing to your conspicuity as a rider. You can thank your head for that!

Wet paint signmeaning

Rest assured, you do not need to splice in to any wires on your motorcycle or go through setups via an app. Brake Free is fully self-contained and works autonomously, just power it on and ride!

If you put your helmet down for some time, Brake Free will automatically switch to ‘Active-standby’ in an effective attempt to preserve energy. While it might seem that Brake Free is turned off, its sensors are still on. Once you pickup your helmet Brake Free will automatically boot itself back up and revert to the last ride-mode selected.

STEALTH-MODE Putting Brake Free in ‘stealth-mode’ activates only the centered 16 leds as DRL (daytime running light) at a ~20% dim-setting but once deceleration is detected all the 100 leds will light up bright for the highest ‘dim-to-bright contrast’ ideal for dusk/dawn and night rides.

Brake Free is equipped with both a gyro-sensor and a accellerometer. This way Brake Free will understand its orientation and sense any forward deceleration event. We also thoroughly designed an advanced algorithm that would filter-out usual head movement. This enables Brake Free to adequately focus on deceleration which means that Brake Free will signal once the rider actuates the footbrake or brakelever but also when he/she starts down-shifting and/or lets go off the gas.

As a rider you constantly change the direction of your helmet. You’ll look out to the road in front, to the sides, your telemetry system as well as your riding buddies. As a result the visible lightspread of Brake Free will not only be visible from the already generous 180º viewing angle directed to the back. In fact it will throw about an incredible 270º viewing angle immensly increasing to your conspicuity as a rider. You can thank your head for that!

Brake Free emits a >180º visble lightspread that easily exceeds the reflective value of any hi-vis gear, plus hi-vis patches or bright coloured helmets always need an external light source to reflect light.

Brake Free emits a >180º visble lightspread that easily exceeds the reflective value of any hi-vis gear, plus hi-vis patches or bright coloured helmets always need an external light source to reflect light.

Wet paint signbunnings

Designed ‘by riders // for riders’ with practicality and simplicity in mind Brake Free is an ultra-bright smart LED brake light for your motorcycle helmet that instantly improves your visibility and safety as a rider. No apps or wires needed, just mount it and go.

Whether it’s engine braking, down-shifting or decelaration caused by actuating the brake lever, Brake Free’s sensory system and programming detects the subtle changes in your speed.