solaroutdoor lights - bunnings

For A-Synch or (wig-wag)  follow the above instructions, then attach the green wire from the lights you want to wig-wag to the power 12v+ and leave it attached.  Now, when you turn on the lights, all of the lights with green wire attached to power 12v + will wig wag with the lights that don’t have the green wire attached to power.  Make sure all the power wires are combined to same power and all of the yellow trigger wires are attached together, so that they switch patterns all at the same time.

TO ASYNCHRONIZE (wig-wag) on all patterns.:  Follow above instruction for synching lights then just hook up one lights green wire to power and leave that one side connected (green wire to 12v).  Now, every time you switch patterns by touching the yellow wires to 12v power, your lights will wig-wag on every pattern

- They come in various styles and designs, including sconces, lanterns, and floodlights, allowing them to fit in with different architectural styles.

Bestsolar light night

Hassle-free, eco-friendly illumination that saves you money, enhances safety and beautifies your property with automatic nighttime lighting.

Solar wall lights are designed to be mounted on walls or fences to provide illumination. They are often used to light up entrances, driveways, and outdoor areas such as patios, decks, or gardens. Here are some of their unique features:

Red wire is power 12v +  /  Black wire is Ground –  / Yellow wire is trigger wire / White wire is for power 12v+ to white light only  / Green wire is for asynchronized wig-wag only.

Solar Night Lightindoor

- They often have motion sensors that turn the lights on and off automatically when someone walks by, increasing their energy efficiency.

Hook up your individual light to 12v red wire, and ground, black wire and light will start flashing, touch trigger wire (brown) to 12v + until you get a specific pattern that you like.  Now disconnect this light.  Repeat this with each light that you will want to synchronize.  Get them all on the same pattern and disconnect from power.  After you are finished, tie all GREEN wires together from all the lights and tie all the brown wires together from all of the lights.  Now when you turn on power to all of the lights together, they will be on the same pattern and synchronized.  Every time you touch white wire to 12v + briefly, then the lights will switch to the next pattern together.  Make sure all green wires are connected to each other after you get them on the same pattern, so that they stay synched.

For synchronized lights, attach all lights to power, red wires.  Attach all black wires to ground, attach all yellow trigger wires together.  After turning lights on together touch and hold the yellow wires to 12v + for 3-4 seconds and all of the lights should turn off for one second in unison, then they come back on.  Now, every time you touch the yellow trigger wire to 12v + briefly, they all switch to the next pattern together.

Best outdoorsolarlights Australia

- They often have motion sensors, which turn the lights on and off automatically when someone approaches, increasing their energy efficiency.

However, when you are not using the solar lights for an extended period or when storing them away for a vacation, it is recommended to turn the switch off. This helps conserve the battery's charge and ensures optimal performance when you decide to use them again.

Solar bollard lights are tall, slender lights that are often used to illuminate pathways, walkways, and driveways. They are typically installed in clusters to create a visually appealing lighting effect. Here are some of their unique features:

Solarlights Outdoor

Although solar lights can work in low light settings, their performance is optimized when they receive a reasonable amount of direct sunlight daily. For ideal results, it is recommended to expose solar panels to at least four to eight hours of direct sunlight each day.

- They come in various heights and designs, allowing them to blend seamlessly with any landscape or architectural style.

Solar lights are most effective when placed in direct sunlight, but they can still function on cloudy days or in areas with partial shade. This is because the photovoltaic (PV) panels in solar lights convert particles of light known as photons into electricity. Photons are present in both direct and indirect sunlight, enabling solar panels to operate under various lighting conditions.

TO SYNCHRONIZE: To run multiple lights synchronized, hook up both lights with red wires to power, black wires to ground and hook up yellow wires together.  Touch and hold the yellow wires to power 12v for 5 seconds, the lights will flash and then both lights will turn off for a few seconds, release the yellow wire from power.  Now, every time you touch yellow wires to 12v power briefly, both lights will change patterns together.

If you prefer not to keep the lights on throughout the entire night, you have the option to manually switch them off. By leaving the switch on, the battery will not drain unnecessarily, and there should be no problems.

Make sure when finished with Synch or Asynch that all red wires are hooked to power and all white wires are hooked to ground, and ALL BROWN wires are connected together.

SolarLights - bunnings

Solar light nightaustralia

Solar spotlights are designed to highlight specific areas or objects, such as trees, statues, or signs. They are often installed on stakes or spikes, allowing them to be easily moved around and adjusted to different angles. Here are some of their unique features:

TO SYNCHRONIZE:  hook up each light to power (red wire) and ground (white wire) then touch the brown wire on each individual light until you get the same pattern on the lights.  Once you are sure that each light is on the same pattern, simply connect all the brown wires together.  Now, every time you touch the brown wires to GROUND, the patterns will switch together and you are synchronized.

- They are designed to withstand harsh outdoor conditions and are often made of durable materials such as stainless steel or aluminum.

Red wire is 12v +  / Black wire is ground –  / Yellow wire is trigger wire touch to 12v+ and green wire is used in A-synch (wig-wag) only.

Kmartsolarlights

TO ASYNCHRONIZE (wig-wag) on all patterns.:  you will be programming each light to be a #1 or a #2.  When you are finished with this process, each #1 light connected with a #2 light will wig-wag on every pattern.  To make a light a #1, hook up red wire to power and white wire to ground, touch the brown wire to ground until you get the “steady on” pattern.  Then, tap the brown wire to ground 5 times really fast, and light should just flicker on-off-on-off-on-off etc.  Disconnect that # 1 light from power.  To make a light a #2, hook up the red wire to power and the white wire to ground and touch the brown wire to ground until you get the “steady on” pattern.  Then, tap the brown wire 5 times really fast to get the light to flicker just like the first light.  Once the # 2 light is flickering on-off-on-off-on-off, touch the brown wire to ground wire twice (2x) and the flicker will change to a double flash flicker.  Now that light is a #2.  When #1s are connected with #2s then they wig-wag on every pattern.

Red wire is 12v +  / Black wire is Ground –  / White wire is trigger (touch to 12v +) and green wire is for synchronizing lights

Solar post-top lights are designed to be installed on top of posts, poles, or pillars. They are often used to illuminate pathways, driveways, or outdoor areas such as parks or public spaces. Here are some of their unique features:

It is advisable to keep the switch of your solar lights in the "on" position during the day to allow them to charge and automatically illuminate when night falls.

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

- They use solar panels to convert sunlight into energy, which is stored in batteries and used to power the lights at night.

Solar driveway lights are designed to provide lighting along driveways, paths, and walkways. They come in various shapes, sizes, and colors, and are often installed in a line along the edges of the driveway. Here are some of their unique features:

Solar festoon lights are decorative lights that are often used for outdoor events, such as weddings, parties, and festivals. They come in various shapes, sizes, and colors and can be strung up in trees, along fences, or around the perimeter of a patio or deck. Here are some of their unique features: