Set the fourth circuit to plug & play a SoundBomb Horn or use it to control the heat settings of your heated gear. You can also set your horn to strobe your auxiliary lights when activated.

We just discussed Wide Turns last week, but it’s worth repeating.  Do NOT try to go around a turning truck no matter how much of a hurry you’re in. The more narrow the streets are, the wider the truck will have to swing out in order to make the turn.

15 June 2023 — Sign Details ; Descriptions, Trucks Crossing Or Entering (Symbolic) ; Standard sign? Yes ; Delegated to council for authorisation. -. This sign is ...

Our red visibility pods are used in each of our B6 brake light products while the amber pods can be used as auxiliary turn signals in addition to amber DRLs.

We take the time to develop more motorcycle specific light mounts than any other brand on the market. We believe in providing only complete solutions so you can spend more time on your bike and less time in your garage.

Filed Under: Trucker Tues Tagged With: #truckertuesday, 18 wheeler, big rig, driving, road signs, semi truck, trucker, trucker tuesday

This one kind of goes with the sign above it. Not only do truckers need to stay in the same gear, but they have to be careful with their brakes as they can actually catch on fire from trying to brake that much weight going down a mountain.  A runaway truck ramp is for truckers that are going to fast and can’t slow down. You basically drive onto it (it’s an upwards dirt roadway) and it will stop you.  It can hurt your truck so we try not to use them if they’re not needed but it’s nice that it’s there for emergencies.

Whether you're looking to make your daily driver more visible to other motorists, or you're building a fully outfitted adventure bike for world travel, DENALI has got you covered. Check out our featured vehicle-specific outfitting guides or scroll further down to see a general guide for outfitting any offroad motorcycle.

Producing an earsplitting 120 decibels of sound, the SoundBomb™ is 4 times louder than a standard motorcycle horn and twice as loud as a standard car horn! Our horns our designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

Our fender mount is the most low profile mounting option and is ideal for mounting DM and D2 lights down low to maximize your visibility to other motorists.

This course prepares staff in chemical handling and spill response training. Staff are trained in using spill control equipment to contain general and chemical ...

The four circuits are pre-programmed to connect and independently control two sets of DENALI 2.0 lights, a SoundBomb horn, and our B6 auxiliary brake light. However, our clever "simple circuit override" feature will let you run any accessory of your choice on any of the four circuits.

Our 2.0 light kits are the brightest, most feature-rich LED light kits in their class. Our HiDrive™ LEDs, Tri-Optic™ Lens system, and DataDim™ Technology are just a few of the unique features you will only find in DENALI 2.0 lights.

The feature-rich brake light circuit will transform a simple 2-wire brake light into a "smart brake light" with multiple flash patterns, and deceleration activated braking functionality.

Shop our range of Portable Lights at warehouse prices from quality brands. Order online for delivery or Click & Collect at your nearest Bunnings.

When you go around a curve or exit the interstate do you ever see signs like this? Trucks not only have to take wider turns, but they have to go around them more slowly. Basically I’d translate this sign as, “You better slow down or you’ll flip your truck taking this curve”

Harness the power and intelligence of your vehicle's CANbus electrical system. The DENALI CANsmart™ Controller provides plug-n-play installation of up to four accessories to enable dozens of customizable settings that can be controlled right from your vehicles original switches or the CANsmart™ Accessory Manager Software.

DENALI is the only brand that can provide a complete lighting and visibility package that includes the lights, light mounts, horn, horn mount, auxiliary brake light, and a single intelligent plug-n-play controller to provide effortless installation and integrated control of all your accessories.

Scroll down to see just a few of the incredible accessory features that can only be enabled by the CANsmart™ Accessory Controller.

W3-2D Give Way Sign Ahead 1200x1200mm. W3-2D. Contact us for a quote. Sign up for our newsletter and stay up to date with the latest from Capital Lines ...

Search from a wide variety of driving lights including Lightforce HTX2, Lightforce LED Genesis, Lightforce LED Venom and Lightforce LED Striker lights to ...

All drivers should pay attention to all the signage along their drive, but some of the signage doesn’t apply to “4 wheelers”.  This one is pretty basic, but do you know what all of them mean?

These low profile mounts are available in both flat and 90 degree options to mount our DRLs to your fairing, frame or front fender.

Independently dim a second set of lights from the original vehicle switches and set one or both sets to cancel when your turn signal is active. You can dim any 2 or 3-wire LED lights.

Most 4 wheelers weigh between 1 and 2 tons. A ton is equal to 2,000 pounds. A fully loaded semi truck can weigh 80,000 lbs which is 40 tons!  There are older roadways and bridges that just can’t take the weight from a semi truck.

A lot of you really enjoyed my post about Trucker Lingo so I thought we could talk about road signs today.   There are signs all along roads or highways, but until I became a driver I didn’t really notice how many.

Our three horns are the loudest most compact horns available; and we don't stop there. We offer more vehicle specific horn mounting and wiring solutions than any other brand on the market.

Shop Slippery When Wet Signs at Get Signs Australia. Our signs warn of slippery surfaces, ideal for pools, bathrooms, and public areas.

Let’s say a city puts up signs to keep trucks out of their down town area. This could be for several reasons –  narrow roads, low branches and signs, etc. The shops in downtown need supplies though so often you’ll see signs like the one above. They don’t want semis driving through the town, but they are allowed to if they have a local delivery.

Hi! I’m Donna. I’m a NextGen Director in the Midwest. I love Jesus, my husband, my family, middle schoolers, CrossFit, and travel.  Email me at [email protected]

So this isn’t really a road sign, but it is a truck sign and it affects driving. This means what it says. Thing about your blind spots in your car. A semi truck has much bigger blind spots. Be respectful if you see them with their blinker on and try to stay out of those blind spots.

Our super bight B6 brake light is surprisingly small but commands attention when illuminated. The modular B6 pod is designed to mate with three unique mounting configurations to ensure a factory fit on your motorcycle.  Choose between a single license plate mount, dual plate mount or flush mount.

SAE/DOT Compliant and 100% Street Legal ... Rigid's Selective Yellow Fog Lights get you the output, clarity, and and definition you need to get through low- ...

NO DOGS ALLOWED.UV Stable.Resist fade and cracking for 5-8 years..

Floor sweeps are a simple solution to any of your spill control needs. Available in a range of sizes, floor sweeps are lightweight and easily accessible.

This sign means that there is a steep decline coming up. Trucks need to stay in the same gear when going down a mountain. If they try shifting during the decline they can actually lose their gear and that can be disastrous. So this prepares a trucker to get it in one gear and stay there to go down the decline.

Bike specific fairing mounts are the ideal mounting option to position driving lights high up on your vehicle where they will be most effective and throwing light down the road. Available for most ADV and Touring motorcycles.

Mount a set of our white or amber DRL pods to your bikes fairing, radiator, or front fender to drastically increase your visibility to other motorists without breaking the bank. Complete with an integrated dual intensity circuit, the lights can be wired to run at full intensity, half intensity or automatically switch between the two with your vehicle's original high beam switch.

Turn auxiliary lights on/off and change brightness levels right from your vehicles original info button or Wonderwheel. Activate a Flash to Pass strobe from your original high beam switch.

Available in both clear and amber. All of our light kits include a spot, flood and hybrid lens option. Use spots for maximum distance, elliptical floods for maximum spread or one of each for the best of both worlds.

Our crashbar mounts are robust and super versatile accommodating bars from 7/8" to 1.5" bars and include a fully rotatable mounting shelf.

Fork mounts also mount the lights up high and are the ideal mounting solution for bikes that don't have bulky fairings like enduros and street bikes.

HALF OFF PONDS LumiNight Pond and Landscape Lighting - 1.5-Watt LED Rock Light. ... Manufacturer's Warranty - LumiNight Lights are Warrantied Against Defective ...

Our visibility line consists of forward and rear facing visibility pods that are designed to be flush mounted or integrated into a variety of universal housings and mounting kits. Like emergency strobe lights, our DRL optics are designed to concentrate the light at the source making them incredibly bright to look at.

Use this off road motorcycle outfitting guide to view our featured products and applications for your adventure bike, dual sport or enduro motorcycle. To see exactly what products fit your bike use our Shop by Vehicle tool.