LED Shoebox Light with Photocell

3: Structural waterproof function: Because of the use of die-cast aluminum technology, our garden lamp has few openings. We use waterproof silica gel at the interface of each mold to ensure the tightness of the lamp and reach IP66 waterproof level , To ensure that no water and dust enter.

4: Excellent expansion performance: A light sensor probe is reserved on the upper part of the lamp housing, and an infrared mobile probe can also be installed under the lamp housing to enhance the energy-saving effect.

LED Shoebox Light 300W

The lamp shell is die-casted and has good impact resistance. The integrated hot plate radiator uses the principle of object phase change to maximize the heat dissipation effect. The heat dissipation efficiency is 25 times higher than that of ordinary aluminum radiators. The integrated hot plate radiator is like a vacuum cleaner that absorbs the heat emitted by the LED. On the radiator. More importantly, the structure of the lamp is reasonable, and the lamp body part is connected up and down, which makes full use of the principle of air flow, so that the gas flows through the radiator without any obstruction. After the lamp works, the heat sucked by the "vacuum cleaner" heats up the surrounding air. The low-temperature gas flows through the radiator and takes away the temperature on the radiator. The high-temperature gas continues to rise to diffuse the heat into the atmosphere, so that the lamp is fully cooled. In this way, the low temperature gas flows into the radiator, and then the high temperature gas is taken out of the radiator, which is equivalent to adding a natural air conditioner to the lamp. Even in a laboratory without any air convection, the structure can still exert the maximum heat dissipation effect. What I just said is the advantage of the through structure in terms of heat dissipation. This structure has another advantage, that is, because the whole body is through up and down, dust and snow cannot accumulate on the radiator, so the lamps can work normally under daily weather conditions. , In addition, the structure through the top and bottom is self-cleaning, rain water can wash away the dust attached to the lamp, and our lampshade is made of PC material with hydrophilic factor, so that the lampshade is not prone to fogging, and various bad weather conditions are not affected The lamps glow normally. Let’s talk about power dissipation. When almost everyone pays attention to LED heat dissipation, we have already turned our attention to power dissipation. But customers know that a lamp with a lifetime of 50,000 hours can only be equipped with a lifetime of 30,000 hours. What should I think about the power supply? Our lamps are guaranteed for 10 years in the true sense. This is not a slogan. This is a true after-sales promise. Our lamps are more expensive than Philips in Europe and America. This is the core value of our lamps. We are developing All links such as technology, process, procurement, production, quality inspection, transportation, after-sales, etc. are strictly controlled. This series of quality assurance is a strong basis for us to dare to say 10 years. We place the power supply on a waterproof board with a grid structure. All the grid structures increase the heat dissipation area of ​​the power supply. The power supply is close to the waterproof board, and the heat emitted is radiated into the atmosphere through the grid. The grid structure is equivalent to adding horizontal and vertical ribs to it, so that the waterproof board integrates heat dissipation, rigidity and sealing. The waterproof board is the only window for installing or replacing the power supply of the lamp. Only the screws on the waterproof board need to be removed. Can complete lighting wiring and maintenance. The lamp adopts a modular design, which truly realizes the separation of the light source module and the power module. This design not only facilitates production, greatly improves production efficiency, it is more convenient for customers to use and after-sales service, and effectively reduces maintenance costs. With time. The waterproof plate of the lamp adopts the hinge structure design, which makes the maintenance operation more convenient. Open the screw and the waterproof plate can be unscrewed freely. It is hung on the tail of the lamp through the hinge. The operator does not need to hold the lamp body, which frees one hand and can completely Focus on construction or maintenance. There are screws at both ends of the lamp body. Remove the screws during maintenance, you can remove the lamp body that needs maintenance, replace it with a new one, and lock the screws to complete the replacement. We also have reserved holes for the induction probe on the top of the lamp to install the light sensor probe. In addition, the infrared sensor probe can be installed on the front of the lamp, so that the shoe box lamp can be equipped with the sensor head as needed. Realize the effect of automatically turning on at night and turning off in the morning, or when a car passes through automatically. The top and bottom of the upper and lower through channels of the luminaire, as well as the periphery of the luminaire, the connection between the lamp body and the lampshade are designed with waterproof edges and drainage edges. The subtle design of this place prevents rainwater from accumulating in key sealed areas, which provides the IP67 protection level of the luminaire Effective guarantee.

Our Bunding Trays are ultra-tough, single piece, and all Australian-made. These are an excellent storage options for all size drums and containers for use throughout many industries. They are nestable for efficient transport and aim to help tidy and organise workshops and storage areas of any size. Try our Mega Tray with a 270L capacity or the Maxi Tray with 250L capacity. The Medium Drip Tray has a 20L capacity and is ideal for use in workshops and around plant and machinery as a drip tray for tools and parts storage. Choose from 7 different types of bunding trays in our Accumax range.

Shoe box lightsoutdoor

MIC shoebox light Our lamp is characterized by strong integration, multiple installation methods, simple and beautiful appearance. It can be used as a street lamp or a garden lamp, and has a wide range of applications. It is a mature product that has been selling well for many years.

Shoe box lightsled

Products listed on this website may not include our entire inventery. Please contact us for information on additional products and brands.

LED Shoebox Light 150W

Shenzhen MIC Optoelectronics Co., Ltd. was founded in 2005 and is located in Longgang District, Shenzhen, Guangdong. It specializes in high-power LED indoor and outdoor lighting. It is a leading integrated operation service company in the field of LED optoelectronics, focusing on the research and development of LED lighting products, Production and sales. The company has standard product production lines, self-support import and export rights, and professional management, research and development, manufacturing and marketing teams, with more than hundreds of employees. Products include: high-power LED street lights, LED solar street lights, LED high bay lights, LED tunnel lights, LED tubes, LED bulbs, LED spotlights, LED track lights, LED engineering lights LED ceiling lights and other high-power LED indoor and outdoor lighting fixtures and LED solar products, which have the advantages of energy saving, environmental protection, and long service life, are widely used in lighting, traffic indication and urban lighting and other fields.

Mitaco has national sales and distribution capabilities, our sales office and warehouse is located in Brisbane. Large inventory holdings enable fast-track dispatch of stock orders. This combined with an easy to use online ordering system makes the delivery of stocked products simple, fast and reliable.

Applicable places: Mainly all outdoor lighting, such as roads, squares, parking lots, yards, gardens, streets, boats, and other places

Bestshoe box lights

The company has passed ISO9001 international quality system certification and ISO14001 international environmental management system certification; and has UL, TUV, CE, ROHS, FCC and other international testing and certification reports for various products.

LED Shoebox Light 200W

Call Us Now: 1300 553 032 Monday - Thursday 9.00am - 5:00pm Friday 9.00am - 4.00pm Closed Saturday – Sunday Email: sales@mitaco.com.au

2: Shell structure: Our shoebox light shell is formed by die-casting aluminum at one time. It is equipped with a finned radiator and integrated into the shell to form an efficient heat dissipation structure. There are 4 types of lamp arms to choose from, which can be placed on a round light pole. It can also be installed on a square pole, on the wall, or on the ceiling.

The appearance of the lamp is stylish, simple, tough and generous, and the whole body adopts simple and smooth lines, which conforms to the aesthetic concept of European and American people. The lamp is popular in Europe and America and is well received by local citizens. The lamp body adopts a square shape as a whole, and the body part and the radiator part are in line with the overall tough style, and some changes are added to the details, adding some beauty. Because it looks more like a shoe box in our daily life, it is called it. Lights for shoe boxes. In the design, the radiator and ribs are deliberately placed outside, making it a part of the appearance of the lamp to highlight the beauty of industry. Especially the reflector design built into the lampshade makes the lamp body look brighter.

Survive by quality, and develop by innovation. Shenzhen Chuangqi Optoelectronics insists on technological innovation for development, adhering to the tenet of "Serving customers wholeheartedly", providing customers with high-quality products and perfect after-sales service. The company is willing to sincerely cooperate with new and old customers and develop together.

1: The LED Shoebox light shell is made of newly designed high-quality all-aluminum material, die-casting one-time forming, the appearance is simple and stylish, the appearance is anodized, electrostatic spraying, the heat dissipation device and the lamp housing are integrated design, corrosion resistance and good heat dissipation performance. The profile has large scattered area, beautiful appearance and good waterproof. The main part of the lamp body can be customized according to the needs of customers.

With the widespread use of high-power LEDs in lighting decoration and lighting, power-type LED drivers are becoming more and more important. It will be possible to use high-power LED lighting for road lighting. Road lighting is the lamp with the longest use time and the most power consumption. The use of LED lamps in street lamps will greatly reduce the shortage of electricity in cities and save national energy. There are many domestic manufacturers of LED street lights, and the performance of their products varies greatly. Here only take the LED street lamp produced by our company as an example. Compare with the traditional street lamp (high pressure sodium lamp).