White lane lines separate lanes of traffic moving in the same direction. Single white lines may also mark the right edge of the pavement.

There are several signs, signals and pavement markings that indicate highway railroad crossings. When you see one of them, slow down and be ready to stop.

OCTAGON: Exclusively for stop signs. HORIZONTAL RECTANGLE: Generally for guide signs. TRIANGLE: Exclusively for yield signs. PENNANT: Advance warning of no passing zones.

Traffic signals are placed at intersections to keep traffic moving and avoid accidents. Drivers, pedestrians, and bicycle riders must obey these signals except when an officer is directing traffic. Stop on the stop line if your car is nearest the signal. Some signals change only when a car is at the stop line. If traffic signals are out of order, stop as you would for a four-way stop sign.

Our Give Way Sign Ahead Warning 900 x 900mm) effectively alerts drivers to an upcoming intersection or area where they must yield, promoting safety and ...

Construction and maintenance signs are used to notify drivers of unusual or potentially dangerous conditions in or near work areas. Most signs used in highway and street work areas are diamond shaped.

Blue and white signs direct you to services, such as gas, food, motels and hospitals. Brown and white signs point out scenic areas and parks.

A green arrow, pointing right or left, means you may make a turn in the direction of the arrow. If the red light is burning at the same time, you must be in the proper lane for such a turn, and you must yield the right-of-way to vehicles and pedestrians within the intersection.

Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

Many crossings have gates with flashing red lights and bells. Stop when the lights begin to flash, and before the gate lowers across your side of the road. Do not move forward until the gates are raised and the lights stop flashing as there may be a train approaching on an adjacent track.

Buy Shoe Box "All-in-one" Solar LED Street Light 15w, 25w, 40w with PIR Sensor from Solar Lighting Direct online. Fast, protected delivery available ...

GREEN GUIDE SIGNS Green and white signs give information about directions and distances. Guide signs on expressways show you which lanes to use to get where you want to go. Routes that run generally East-West have even numbers and those running North-South have odd numbers.

You must never drive in a lane under a red X. A yellow X means that your lane signal is going to change to red. Prepare to leave the lane safely. You may drive in lanes beneath the green arrow, but you must also obey all other signs and signals.

Come to a complete stop at the marked stop line or before moving into the crosswalk or intersection. After stopping, you may turn right on red at most intersections if the way is clear. Some intersections display a "NO TURN ON RED" sign, which you must obey. Left turns on red from a one-way street into a one-way street are also allowed.

Any pedestrian or person driving a vehicle and approaching a railroad highway grade crossing must stop within 50 feet but not less than 15 feet from the nearest rail of the the railroad when the electrical or mechanical warning devices are flashing, the crossing gate is lowered, a human flagger is warning of an approaching train, or an approaching train is clearly visible and is in close proximity to the railroad highway grade crossing. Do not proceed until you can do so safely.

Check out our 3 aa batteries selection for the very best in unique or custom, handmade pieces from our shops.

Some highways have reversible traffic lanes to help handle rush-hour traffic. The direction of traffic is normally reversed at set times each day. These pavement markings are used along with special lane signals and other signs and symbols.

Barricades, vertical panels, drums, and cones are the most commonly used devices to alert drivers of unusual or potentially dangerous conditions in highway and street work zones. These devices are used to guide the drivers safely through the work area, and at night, they may be equipped with warning lights. When a Road Closed sign is displayed, do not drive on this road. Look for a detour or another route.

Various traffic control devices are used in road construction and maintenance work areas to direct drivers and pedestrians safely through the work site and to provide for the safety of highway workers. Be prepared to reduce your speed and use caution when directed to do so by a sign, flagger and/or police officer.

2 Aug 2023 — The slippery road sign is a warning sign that features a silhouette of a car with two swerving lines underneath it. According to the Highway ...

Flashing arrow panels are used both during the day and at night to give advance warning and directional information to drivers where it is necessary to move to the right or to the left into another lane.

Trains cannot stop quickly. An average freight train traveling at 30 MPH needs a stopping distance of more than half a mile. Longer trains moving at faster speeds can take one and a half miles or more to stop.

We stock a wide range of spill kit products for industrial spill management. Shop universal spill absorbent products to quickly contain oils, ...

At many highway-rail crossings, the crossbuck has flashing red lights and bells. When the lights begin to flash, stop! A train is approaching. DO NOT STOP ON THE TRACKS OR WITHIN SIX FEET OF EITHER RAIL. Do not move forward until you can do so safely. If there is more than one track, make sure all tracks are clear before crossing. In heavy traffic make sure there is room for your vehicle on the other side before starting to cross.

StateofFlorida.com is not an official publication of the State of Florida. Copyright © , StateofFlorida.com. All Rights Reserved."Florida Information Locator" and "It's Your Florida!" are registered servicemarks in the State of Florida.

A four-way stop sign means that there are four stop signs at this intersection. Traffic from all four directions must stop. The first vehicle to reach the intersection should move forward first. If two vehicles reach the intersection at the same time, the driver on the left yields to the driver on the right.

As you approach this sign, slow down, watch for children crossing the road. Stop if necessary. Obey signals from any crossing guards.

This sign lists the maximum recommended safe speed for an entrance or exit on an expressway. Slow down to whatever speed is shown.

White and yellow lines are used along pavement edges and between lanes to keep vehicles in line. These lines may be solid or broken (long dashes), single or double.

Vat is applicable to all UK orders. Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Two-way roadway with a center lane for left turns in either direction of travel. The specially marked center turn lane is intended for slowing down and for sheltering of turning vehicles and may not be used for passing.

If there is no marked stop line, stop before entering the crosswalk on the near side of the intersection. If there is no crosswalk, stop at a point nearest the intersecting roadway where you have a clear view of approaching traffic on the intersecting roadway before entering the intersection.

StateofFlorida.com is not affiliated with, owned, or operated by the State of Florida and is not endorsed or approved by the State of Florida. Visit MyFlorida.com

Our Form 1 Lane sign (600 x 800mm) is essential for lane control, clearly indicating the formation of a single lane. This sign enhances traffic organisation ...

Lines, symbols and words are often painted on a roadway to help direct drivers and control traffic flow. You must know what the different lines and colors mean and obey them as you would traffic signs or signals.

Yellow lane lines separate lanes of traffic moving in opposite directions. Single yellow lines may also mark the left edge of the pavement on divided highways and one-way streets.

PRINTED ALUMINUM A3 SIGN - No Mobile Phones On This Site Sign · SKU: SIGN-0184-A3 · Calculate Shipping · More From This Category · PRINTED ALUMINUM A5 SIGN - Turn ...

Crossbuck signs are found at highway-rail intersections. They are yield signs. You are legally required to yield the right of way to trains. Slow down, look and listen for a train, and stop if a train approaches. When the road crosses over more than one set of tracks, a sign below the crossbuck will indicate the number of tracks.

Stop signs are always octagonal (8 sided). A stop sign means that you must bring your vehicle to a complete halt at the marked stop line.

Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

Small round surface mount toggle on/off switch, 28mm diameter x approx 13mm tall cover. Chrome plated cover (unscrews to get to terminals). Only suitable for 6 volt or 12 volt, maximum rating 3 amp.

Go — but only if the intersection is clear. Yield to pedestrians and vehicles still in the intersection. If turning left, wait for gap in oncoming traffic to complete turn.

The lane marking arrow, in the center lane in the diagram below, indicates that traffic in this lane can be reversed in accordance with local traffic controls due to "rush hour" traffic or other special traffic conditions.

Stop if you can. The light will soon be red. The yellow arrow means the same as the yellow light, but applies only to movement in the direction of the arrow.

Slow down and give vehicles crossing your path the right-of-way. If the way is clear, you may move forward slowly without stopping. Yield signs are usually placed where auxiliary roads lead into major roads.

SLOW MOVING VEHICLE Vehicles going less than 25 miles per hour (such as farm equipment) must display this sign on the rear when using public highways.

Come to a complete stop at the marked stop line or before moving into the crosswalk or intersection. After stopping, you may turn right on red arrow at most intersections if the way is clear. Some intersections display a "NO TURN ON RED" sign, which you must obey. Left turns on red arrow from a one-way street into a one-way street are also allowed.

Narrow bridge. These signs warn you of special conditions or dangers ahead. Words or symbols on the sign will show why you need to use caution. See pages 58-60 for typical warning signs.

If your car stalls on the tracks don't hesitate. Get yourself and your passengers out and away from the car immediately. If a collision is imminent, the safest direction is toward the train but stay off the tracks. That way you will be least likely to be hit by your vehicle or any debris from the collision.

ANIMAL CROSSING. The animal pictured on the sign is common in this area: watch for this species crossing the road particularly during twilight and nighttime hours.

Small round surface mount toggle on/off switch, 28mm diameter x approx 13mm tall cover. Chrome plated cover (unscrews to get to terminals). Only suitable for 6 volt or 12 volt, maximum rating 3 amp.

This sign is used on multiple lane highways to advise slower driving traffic to stay in the right hand lane; and also to do so when approached from behind by other traffic even if you are doing the speed limit.

Vat is applicable to all UK orders. Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Pavement markings, consisting of an RXR followed by a stop line closer to the tracks, may be painted on the paved approach to a crossing. Any person walking or driving a vehicle must stop within 50 feet but not less than 15 feet of the crossing. Stay behind the stop line while waiting for a train to pass.

There are eight shapes and eight colors of traffic signs. Each shape and each color has an exact meaning, so you must acquaint yourself with all of them.

Always approach highway-railroad crossings at a reasonable speed — and be prepared to stop if you have to. Be especially alert when you are following buses or trucks which may have to stop at highway-railroad crossings even if any gates are up and the warning lights are not flashing.

A flashing red light means the same thing as a stop sign. It is used at dangerous intersections. A flashing yellow light means you may move forward with caution. It is used at or just before dangerous intersections, or to alert you to a warning sign such as a school crossing or sharp curve.

A diamond-shaped marking shows that a lane is reserved for certain purposes or certain vehicles. The lanes are usually reserved for buses or car-pool vehicles during rush hour traffic. Other diamond signs are used to designate bicycle lanes.

OCAM Bull Bar LED Fog light RHS (1pce) Driver Side. Suits all OCAM Premium Bull Bars. PICK UP & PHONE ENQUIRIES WELCOME.

Spill Kit Products · ZeoMED™ Biohazard Spill Kit · CYTOTOXIX BODY FLUID SPILL KIT PURPLE · CYTOTOXIX CHEMICAL SPILL KIT PURPLE · Infectious Waste Clean-up ...

The advance warning sign is usually the first sign you see when approaching a highway-rail intersection. The advance warning sign advises you to slow down, look, and listen for a train, and be prepared to stop if a train is approaching.

It's Wireless - Transmitter Plug connects to a 7-round pin socket, without those annoying wires that are always in the way. Transmitter has a signal range of ...

A solid white line marks the edge of the pavement on most roads. Stop lines, crosswalks and parking spaces are also marked by white lines. Symbols such as arrows are in white also. A single yellow line marks the left edge of all divided or one-way roadways. Curbs are often marked yellow in no-parking zones near fire hydrants or intersections.

At the intersection ahead traffic in left lane must turn left and traffic in adjoining lane may turn left or continue straight ahead.