Used on daylight and tungsten light sources to provide green cast when used in conjunction with discharge lighting. Approximately equivalent to CC30 green camera filter.

Strong diffusion on thick polyester for easy use on panels and in channels. Can be used close to LED chip to provide some blurring of the pixels.

A warm highlight leaning toward amber, good for warm front light, complimentary to most skin tones. Barbara Walters favourite colour!

Correct a daylight source to an off white tungsten source. Used with a tungsten source provides a “dingy” effect like a smoky bar.

Filter led lightoutdoor

The pack includes 2x sheets of 201, 202, 204, 205, 216, 250, and 210, and 1x sheet of the rest — all measuring 250mm x 300mm (10″ x 12″). Included filters: 181, 202, 201, 738, 205, 204, 106, 216, 250, 187, 188, 210, 270, 280, 224, 775, 251.

Allows you to create 50 colours from just 12 filters. The pack includes 1x sheet of each colour, all measuring 250mm x 300mm (10″ x 12″). Included colours: 180, 126, 116, 144, 118, 122, 101, 179, 192, 128, 129, 228.

Contains a selection of technical filters for colour correction. The pack includes 1x sheet of each filter, all measuring 250mm x 300mm (10″ x 12″). Included filters: 241, 219, 242, 243, 245, 244, 206, 205.

Features a selection of colour temperature blue (CTB) filters used to convert tungsten lights to daylight or electronic flash. Varying densities of blue will allow for partial corrections, general cooling, and effects such as moonlight.

A good starter pack for exploring the basics of colour addition and subtraction. The pack includes 1x sheet of each colour, all measuring 250mm x 300mm (10″ x 12″). Included colours: 119, 174, 115, 117, 124, 138, 007, 101, 164, 176, 035, 128.

Features lighting filters that complement the Original Colour Magic pack to create alternative shades. The pack includes 1x sheet of each colour, all measuring 250mm x 300mm (10″ x 12″). Included filters: 702, 048, 174, 131, 088, 100, 108, 164, 157, 002, 228, 250.

The sheets are all manufactured from high quality, lightweight, and flexible material. Available in 610mm x 530mm sheets.

A cold lavender when used with a full tungsten source, but warms as the source is dimmed. Good as a fill for slow sunset fades.

Filter led lightprice

Denser, saturated orange version of 135 avoiding pinky red. Good for backlight, instruments, part of a sunset palette, and getting a party atmosphere. Madge is short for Imagination.

A dense white diffuser used for wide beam spreads; creates an even, soft, field of light without shadows. Manufactured on a 125 micron polyester base.

Features a selection of our most popular diffusion materials used to create a wide variety of effects, ranging from a subtle softening of the beam edge to creating a large shadowless area.

Features a selection of 4 vibrant colours. The pack includes 3x sheets of each colour, all measuring 250mm x 250mm (10″ x 10″). Included filters: 048, 132, 327, 127.

The pack includes 2x sheets of each colour, all measuring 250mm x 300mm (10″ x 12″). Included filters: 184, 187, 188, 186, 775, 191.

Features a selection of 4 vibrant colours. The pack includes 3x sheets of each colour, all measuring 250mm x 250mm (10″ x 10″). Included filters: 181, 116, 158, 128.

Filter led lightceiling

The pack includes 2x sheets of each colour, all measuring 250mm x 300mm (10″ x 12″). Included filters: 106, 139, 119, 010, 790, 181.

Contains practically everything you need to handle any lighting situation — CTO to convert daylight to tungsten, CTB to convert tungsten to daylight, greens to match fluorescent tubes, and effects filters to add colour to backgrounds and accent lights. Plus our most popular diffusions, scrim, and black foil.

Features a selection of colour temperature orange (CTO) filters used to convert electronic flash or daylight to match tungsten lighting. Varying densities of orange will allow for partial corrections as well as effects such as sunlight or general warming. Also includes LEE 208, a combination of CTO & 0.6ND (85ND6), to be used when warming and an additional reduction in light are required at the same time.

A warm highlight leaning toward amber, good for warm front light, complimentary to most skin tones. Barbara Walters favourite colour!

This pack includes 2x sheets of 200, 201, 202, 203, 204, 205, 206, 216, 250, 251, 210, and 224, and 1x sheet of the rest — all measuring 250mm x 300mm (10″ x 12″). Included filters: 181, 126, 202, 203, 200, 201, 219, 245, 244, 738, 206, 205, 204, 106, 216, 250, 251, 187, 188, 210, 270, 280, 775.

Longer life filter used to very slightly cool down the colour of warm white LEDs, allowing different batches of LEDs to be used together.

Cool down the colour of warm white LEDs. The Zircon Density filters provide a controlled reduction to the light level of LEDs, while Zircon Diffusion filters complete the set.

Used on daylight and tungsten light sources to provide green cast when used in conjunction with discharge lighting. Approximately equivalent to CC15 green camera filter.

Features a range of technical filters for basic light-source control. The pack includes 1x sheet of each filter, all measuring 250mm x 300mm (10″ x 12″). Included filters: 281, 201, 285, 204, 209, 210, 211, 298.

LED Light filtercovers

Used on daylight and tungsten light sources to provide green cast when used in conjunction with discharge lighting. Approximately equivalent to CC15 green camera filter.

The pack includes 2x sheets of each filter, all measuring 250mm x 300mm (10″ x 12″). Included filters: 216, 250, 251, 253, 400, 410.

A weak diffusion used for softening spotlight beam edges without altering shape. Manufactured on a 23 micron polyester base.

Medium diffusion on thick polyester for easy use on panels and in channels. Provides reasonable diffusion properties without too much loss of light.

Contains a selection of saturated effect colours for use on backgrounds and for accent lights. In addition to general effects, the three primary colours (Red, Green, and Blue) can be used for colour mixing.

Contains 8 sheets of lighting reflectors in Mirror Gold (x2), Mirror Silver (x2), Soft Gold (x2), and Soft Silver (x2). These reflectors can be used as they are or mounted on polystyrene or board for added rigidity. They are ideal for use in the studio or out on location.

Contains a selection of our ever-popular range of cosmetic filters, used to enhance skin tones while simultaneously softening the light. While primarily designed for portraiture, these filters can also be used to add a slightly diffused colour to backgrounds and accent lights.

Warmlight filterforLED

A warm highlight leaning toward amber, good for warm front light, complimentary to most skin tones. Barbara Walters favourite colour!

self-adhesive warmlight filter

A warm highlight leaning toward apricot, good for warm front light, complimentary to most skin tones, beware of use on pale skin: tends to look pink.

Features a selection of vibrant colours to light a DJ set. The pack includes 1x sheet of each colour, all measuring 250mm x 250mm (10″ x 10″). Included filters: 048, 181, 343, 068, 116, 323, 327, 015, 020, 024, 026, 328.

General tungsten to fluorescent correction for use when fluorescent colour temp is unknown, to provide medium correction.

Strong diffusion on thick polyester for easy use on panels and in channels. Can be used close to LED chip to provide some blurring of the pixels.

General tungsten to fluorescent correction for use when fluorescent colour temp is unknown, to provide medium correction.

Contains 9 sheets — 300mm x 300mm (12″ x 12″), thickness 180 microns. Included filters: 810, 811, 812, 815, 816, 817, 818, 819, 820.

A warm highlight leaning toward apricot, good for warm front light, complimentary to most skin tones, beware of use on pale skin: tends to look pink.

Contains 14 sheets — 300mm x 300mm (12″ x 12″), thickness 180 microns. Included filters: 801, 802, 803, 804, 805, 806, 807, 813, 808, 809, 814, 818, 819, 820.

Contains a selection of our most popular and functional filters. CTO to convert daylight to tungsten, CTB to convert tungsten to daylight, effect filters to add colour to backgrounds and accent lights, and a selection of diffusions, scrim, and black foil to add texture and shape to the light source.

Strongest diffusion on thick polyester for easy use on panels and in channels. Can be used close to LED chip to blur the pixels.

Contains 12 sheets — 300mm x 300mm (12″ x 12″), thickness 180 microns. Included filters: 806, 807, 813, 808, 809, 814, 810, 811, 812, 815, 816, 817.

Lighting Gels bunnings

Features paler shades to give more subtle effects and to filter white light from the lamp. The pack includes 1x sheet of each colour, all measuring 250mm x 300mm (10″ x 12″). Included colours: 169, 063, 061, 213, 007, 103, 009, 162, 154, 035, 003, 255.

Longer life filter used to very slightly cool down the colour of warm white LEDs, allowing different batches of LEDs to be used together.

The pack includes 2x sheets of each colour, all measuring 250mm x 300mm (10″ x 12″). Included filters: 202, 203, 200, 201, 218, 224.

An extensive toolkit to correct a variety of issues associated with LEDs including removing green casts, warming different colour temperature white LEDs, and cooling warm white LEDs.

Correct and warm up a range of different colour temperature white LEDs. The Zircon Density filters provide a controlled reduction to the light level of LEDs, while Zircon Diffusion filters complete the set.

Absco Sheds have undertaken every effort to ensure all images and product information is correct and relevant. We reserve the right to correct errors at any time without notice. Images included on this website are for illustrative purposes only and may not show all or correct colours, product features and/or optional extras

Features a range of technical filters for fine control of light sources. The pack includes 2x sheets of each filter, all measuring 250mm x 300mm (10″ x 12″). Included filters: 202, 203, 206, 205, 223, 218.

Medium diffusion on thick polyester for easy use on panels and in channels. Provides reasonable diffusion properties without too much loss of light.

Features a selection of vibrant colours to light a DJ set. The pack includes 1x sheet of each colour, all measuring 250mm x 250mm (10″ x 10″). Included filters: 180, 797, 197, 141, 735, 089, 105, 744, 507, 027, 328, 113.

Features a selection of strong and vibrant colours for more intense colour combinations. The pack includes 1x sheet of each colour, all measuring 250mm x 300mm (10″ x 12″). Included colours: 181, 126, 120, 116, 139, 101, 105, 135, 182, 027, 332, 129.

The pack includes 2x sheets of each colour, all measuring 250mm x 300mm (10″ x 12″). Included filters: 208, 206, 205, 285, 204, 223.

Filter led lightaustralia

Our lighting filter packs come in a wide range of options, providing lighting designers with handy selections of filters for the most prevalent tasks. Find everything you need to control common lighting conditions.

A warm highlight leaning toward apricot, good for warm front light, complimentary to most skin tones, beware of use on pale skin: tends to look pink.

Used on daylight and tungsten light sources to provide green cast when used in conjunction with discharge lighting. Approximately equivalent to CC30 green camera filter.

Strongest diffusion on thick polyester for easy use on panels and in channels. Can be used close to LED chip to blur the pixels.

Consists of 24 specially selected lighting filters, including 15 colour effect filters used for lighting backgrounds and creating special effects. Four colour-temperature correction grades (Full and Half Colour Temperature Blue, and Full and Half Colour Temperature Orange) can balance colour temperatures when working in a combination of daylight and tungsten lighting conditions. Two Neutral Density (0.3ND and 0.6ND) grades can reduce the power of a flash head or studio lamp to balance the intensities of lights or flash. Finally, two white diffusers can be used on their own or with other filters to eliminate shadows and soften the overall lighting effect.