Hi, If I had lights on either end of my truck wired on different harness’s is it possible for them to work of one wireless remote? Thanks, Ali

No,it doesn't.   Maybe you can choose that one which comes with no flush   https://www.vividlightbars.com/collections/color-changing-light-bar/products/3-2-wireless-remote-color-changing-flash-cube-pods

Thank you for your question, you can use the same controller to control a pair of pods and a pair of flush mounts, and the key fob is the only way to control them at present, we don't have the switch controller option yet.

The one cable was to short for my right side of my truck on the rear. Need a 4ג€™ connector cable extension ect. Please send me one. Thanks.

They are same , I guess that you want ask the difference between flush pods and regular pods , pls check the products photos of two products, will understand it easily

Thank you for your question, there is a mode that the pods can alternative flash on white and amber suring the same cycle.

I see you have a selection box for "two flood, two spot", but it is not selectable (grayed/exed out). This is the option I would like to buy - if you don't offer that, why show that box?

So I’m looking at the 3.2 duel color flush mounts link: https://www.vividlightbars.com/products/3-2-wireless-remote-led-color-changing-flush-pods-lights3-2-dual-color-led-flush-pods?variant=31072750338184¤cy=USD&utm_source=stry&utm_medium=trafb&utm_campaign=storeya60&utm_term=&gad_source=1 What I’m looking to do is have two of these flush mounted to the front of my car and have the amber light be wired in with my existing drl wiring and while I have the leds on an existing button panel I have in my car already. I saw they flash so I wanted to make sure they didn’t flash all the time and that these can be set up like regular drl lights and be wired into an existing panel

Hey I am wanting to get two pairs of the Bluetooth version flush mount pods. I am not sure what ones to order from the site to get them ones? Also if they are mounted side by side is the total length 6"? And are your prices American? Let me know thanks!

Thanks for your question.pls see the answer for your reference.1. Spot beams are meant to provide light to a specific area. When using a light with a spot beam, it will have a refined light spread which is intended for long range visibility.2.Flood lights provide a much larger spread of light but at a smaller distance. Many people use flood lights to illuminate large areas such as construction sites.

Honestly ordered these because I seen them all over Instagram and now since I have them mounted in my back bumper I am very impressed at how bright they are and the way the function. Great product and I plan on doing more business soon.

When these are in stobe mode do you have the ability to strobe two colors (amber and white) during the same cycle or can you only strobe one color at a time? Thanks

Hi,you can use our custom control wire for the pods. Two wires will go to the power, and the other two wires will go to control the white/amber color. But it will no strobe function unless your car system has stroboscopic functions.

Thank you for your question ! Just buying 2 x a pair pods,  it will come with 2 wiring harness and 4 remote controller,  the 4 controller would control them separately.

Thank you for your question, yes, you can do that, our pods have the white/blue one, if you needn't the pods flash white, you can use the remote to choose a mode that just flash blue.

This is my second pair of lights the first pair that I had one of them stopped flashing the red color so I’m hoping for better performance out of these that I have just received

Thank you for your question.   These are 1600lm for each one.    Custom wire mean it doesn't come with  our controller, just 2 of power lines and 2 of signal lines, you can connect the signal wire to your own controller.

Hello，thanks for your inquiry. Please choose the color white/ amber, and it can flash pure amber and be steady white, and it could connect to a rocker switch, please choose our pre-wired controller.

How long are the wiring harnesses? I have the same truck that is in the sample video and want the same set up. Crew cab long box. Does the harness reach from the battery all the way to the rear bumper?

Can I wire this into my emergency light control panel but I need to use your controller to turn on and off change patterns

We had to replace our front bar and we looked a lot of bars this bar looks good with a good price also it is complete bar replacement as most of the other bars u have to cut the original bar which look bad and wasn’t an option for us

Lights work and function great. No fading in LEDs over time and no condensation. Extension cables were easy to install too.

This Brake/Turn Signal Line has 3 wires, which will have different flash effects when touch with positive wire.Black Line for Right Turn;Yellow Line for Left Turn;Red Line for Brake.

Havenג€™t fully installed the lights yet, but they seem to be very good quality. The wiring and control box also seem to be good quality as well. I got flood lights and they were not as bright as I though they would be, but they are lighting up a very large area. Also, I would recommend ordering a few cable extensions to make sure you have enough wire to go from the control box to each light. Also donג€™t make the mistake I did and order the wrong wiring harness. If you have 4 lights, you will want the quad wiring harness.

I had some missing items in the pack that I had purchased and the Aussie offroad team were all over it, they were really communicative and amazing with problem solving. I would highly recommend them to anyone looking at decking out their cars. I will be a returning customer for sure.

These dampeners have great Velcro that feel like they'll last. High vis is great to if you're in need when changing a tyre on the side on the road.

Hi. you should choose bluetooth remote rgbw led flush pods halo. not this one . the correct link : https://www.vividlightbars.com/collections/rgb-halo-pods. they are not including mount bracket , exactly 3.2". the price is USA dollar .

Hi, thank you for your question.It can add the brake/turn signal line. But one pod can only light up one color at a time.

26" SUPER SLIM LED LIGHT BAR    5W each CREE XTE LED chip with 6D reflector Operating Voltage: 10-30VWaterproof rate: IP 67Color Temperature: 6000KBeam: driving beam,Body Color: BlackMaterial: Diec...

Hello, I want to use a pair as backup lights and a pair as fog lights. Do I have to have two separate controllers to control them separately or can they be controlled separately off of the same controller?

No, you can. Once you wire the pods into your emergency light control panel, you only can use your control panel to turn on and off change patterns.

yes, you can choose 3 pins wire for customer's existing switch panel , control these solid and strobe pattern via your switch panel .

Does it come with other brackets? I cant mount them flush on the bumper? I have a hino 258 plan on putting them somewhere in the bumper

can you wire these to do a red pattern strobe and a red white strobe and a white flood and or can the colors be set to a steady burn and wired to an external flasher

Hello, in this case, you could choose custom control wire, but please note that only if there is strobe function on your truck could our lights flash, besides, custom control wire will make the lights lose alternate/sync strobe patterns. (Here is how custom control wire works: it consists of 2 power wires and 2 signal wires, Connect two power wires to your truck battery and two signal wires to your own controller. Two signal wires control two colors separately. For example, if you choose White/Amber, one of signal wire controls white and another one controls amber. Touch the positive power wire with the signal wire to show color.)

Aussie Offroad did a brilliant job including accessories in the package which were far in excess of what I expected in the quoted price. The fitted package of Roadarmor bullbar and accessories complemented my Ford Everest Sport unbelievably and made the front appearance 'MEAN'

Can you control a pair of pods with a pair of flush mounts with the same controller and can i tie tgem into my switch box or is the key fob the only way to control them

Does one color have priority over the other, say I'm using the red/white for reverse/brake light and want the reverse light to stay on even though I'm pressing the brake light.

Hello, Sorry, it's dual color changing, like white/amber, there will be steady white color, steady amber color, strobe white color as well as strobe amber color.

Hello, Thanks for your inquiry. I'm sorry, If you only need 2 pods, there is no such option as "two flood, two spot", but you can note that "1 spot and 1 flood" are under your order, and we will make pods according to your requirements after we see them. If you are buying 4 pods, it is the option of 2"two flood, two spot".

Looks good - quite solidly built. Fan and light work well when we have tried it out - have yet to use on the road - should be an asset to the camping experience