Emergencyredlights for vehicles

Guideline for connecting the red, yellow and white control cables: 1. The red cable connects the master switch power cable to the ACC. If you want to light up the LED lamps before the car start-up, please connect the recommended because the higher the power is, the more the power of the battery will be consumed. 2. The yellow cable connects the width lamp to the master switch panel. 3. The white cable is the panel light brightness control cable. It can control 3 brightness levels by each switching. You can disconnect the white cable in order to have the most brightness switch panel if required.

The most comprehensive M22 built-in signal device series is available in three sizes: Ø 30 mm, Ø 45 mm und Ø 65 mm. The high luminosity and signal effect is seen frontally and laterally due to the calotte. The luminaire is particularly durable and vibration-resistant, with a high degree of protection of IP65 and IP67 for prewired models.

Led red strobe lightcar

The M22 series buzzer, the loudest installation buzzer available on the market, is available as an add-on for the installation series.  The high sound pressure level (max. 100 dB) is mostly infinitely variable. Luminaire models with LED technology can be upgraded to an optical-acoustic combination with the piezo buzzer. Sound and light can be synchronised or separately controlled.