The Dual Color LED configuration uses our RGBA LED strip but instead of pairing that LED strip with an RGB LED controller (to mix up to 16 million different color combinations), we hard wire a combination of one, two or all three of the RGB diodes (red, green or blue) along with the AMBER diode to two on/off switches. One switch operates the primary color diode(s). The other switch operates the amber diode. There are a total of seven Dual Color configuration options: RED+AMBER, GREEN+AMBER, BLUE+AMBER, MAGENTA+AMBER, YELLOW+AMBER, CYAN+AMBER, WHITE+AMBER. With a Dual Color configuration you don't need an LED Controller. Instead, you only need two switches (and relays); one to control each color. The primary color is chosen from the available dual color drop down list. The secondary color is always amber. Note: The Dual Color options includes one ON-OFF-ON 3 way toggle switch and two, 30 amp relays.

Copyright © BOOGEY INC. All Rights Reserved. | Boogey Lights, Rule the Nite, Cut 'N Click, TheBoogeyBox, Mega TNT, TNT Grenade, King Boogey and Lumina are registered trademarks of Boogey Inc. All content on this website including product images, product text, promotional images and videos is copyrighted material. It may not be used without the expressed written consent of BOOGEY INC.

Copyright © 2024 BOOGEY INC. dba BOOGEY LIGHTS | The names Boogey Lights, Rule the Nite, Cut 'N Click, TheBoogeyBox, Mega TNT, TNT Grenade along with the graphic design images of King Boogey and Lumina are registered trademarks of Boogey Inc. All content on this website including product images, product text, promotional images and videos is copyrighted material. They may not be used without the expressed written consent of BOOGEY INC.

The Quick Switch feature comes standard on our HEAVY DUTY SINGLE ZONE and HD DUAL ZONE LED Controllers (all RGBx controllers).  It also comes standard on our SINGLE COLOR DUAL ZONE STROBING CONTROLLER. Whatever color LED you have connected to the WHITE output wire on the controller is the color that will display when the Quick Switch is triggered with 12vdc +.  The most common use for this configuration is with commercial vehicles who want to be able to instantly turn off whatever color they're running and turn on a DOT compliant AMBER which is on our RGBA LED strips. For these installations, the yellow trigger wire is connected to a toggle switch or other wireless switch that activates the AMBER leds.   When the Quick Switch trigger wire is not energized, the LED controller operates the RGBx diodes normally.

Light up your pickup truck with a Boogey Lights® Under-Glow LED light kit! Our super bright, low profile LED strips are built tough to withstand harsh outdoor operating environments. And with more LEDs per inch than any other LED light strip on the market, nothing is brighter! This UNDER-GLOW LED light kit can be configured for just about any pickup truck. This kit is designed to attach to the bottom of the truck and provide full perimeter under-glow lighting (all four sides of the truck). There's even an option to add wheel well lighting, grill lighting and bed lighting. When installed properly, you'll only see the glow from the LED strips; you'll never see the actual LED strips themselves.

This light kit is based on our popular high performance LOW PROFILE (or HEAVY DUTY LED strips depending on your product configuration). Details about these LED strips can be found by clicking on the button below or by clicking on the SPECS navigation tab appearing on this product page. If you want to know what makes Boogey Lights® LED lighting products different than any other lighting system out there, check out this link: WHY BOOGEY LIGHTS .

Single Color On/Off with relay (hard wired): This option is available for any single color selection. It's a simple on/off switch with relay.

LED COLOR OPTIONS: This option tells us what color format you want for your truck under-glow led light kit. There are three multi-color, seven dual-color and eight single color options. We have a detailed discussion about these LED color options further down on this product page. Be sure to read it. It's important. If you select any of the three multi-color options, you'll be presented with a couple of LED CONTROLLER selections (essential to operate RGBx LEDs). If you select any of the nine dual-color or eight single color options, you'll be presented with optional switching and control options.

No Switch Mechanism. Provide Your Own.: This option is available on all single color and dual-color LED light selections. It's not an option for RGBx LED color options. Select this option if you have your own switching mechanism. NOTE: We strongly suggest using a relay. These lights are bright and as such, pull more amperage than a typical LED light (see specs tab for details).

RGBA is a new LED strip format Boogey Lights® developed. It is available in both our Low Profile and Heavy Duty LED strip formats. The RGBA led strip includes our core RGB tri-chip technology using a 5050 RGB LED with the addition of a fourth 2835 diode that is AMBER. Designed primarily for motor vehicle applications, that fourth AMBER diode can be wired to a separate switch on the dash (or tied into a relay to work with existing running lights) that allows you to quickly and easily turn on just the AMBER leds. Then, for those who want the flexibility to be able to display up to 16 million color combinations using the RGB tri-chip, they can do that too. RGB + A provides the best of both worlds. Single color amber plus RGB tri-chip multi-color. The product photo carousel of this product page includes a close-up view of the LED strip design and wiring diagram. Note that due to the addition of that fourth diode, the RGBA strips are a little wider than our standard tri-chip RGB and single color LED strips.  Also, the power lead wires use five conductor vs four. For additional information including product specs, click the SPECS navigation tab on this product page.

DUAL COLOR: The Dual Color LED configuration uses our RGBA LED strip where the primary color can be one of 7 different colors and the secondary color is always amber. There are a total of seven Dual Color configuration options: RED+AMBER, GREEN+AMBER, BLUE+AMBER, MAGENTA+AMBER, YELLOW+AMBER, CYAN+AMBER, WHITE+AMBER. With a Dual Color configuration you don't need an LED Controller. Instead, you only need a 3 position switch (or two switches) - and relays; one to control each color. The primary color is chosen from the available LED dual color drop down list. The secondary color is always amber.

You may also want to check out our section of HOW-TO VIDEOS which many customers find helpful with deciding how they want to install their Under-Glow lights.

The wheelbase measurement is the most important piece of data we need. If you get this wrong, your light kit will not fit properly. In our experience, lots of guys think they know the wheelbase of their truck but more often than not, the number they use has been passed down to them from the dealer or previous owner. Do not assume the wheelbase number you were given is accurate. We strongly urge customers to take an extra 10 minutes before ordering to take an accurate wheelbase measurement of their truck. Another option is to look on the inside door jamb of the drivers door for the manufacturer's specifications sticker. It will list the wheelbase there too. The other problem of course is that not everyone knows what the wheelbase measurement is which is why we created the below diagram. Note that while you can always do an online search for your wheelbase, be sure you know the exact type of cab you have. Various manufacturers use different names for the cab types. It's very easy to get confused on which cab type you have which is why we suggest taking the actual measurement yourself or look on the inside driver's side door jamb for the information. Do not skip this step. If you get this number wrong, your light kit will not fit properly.

Here's a video of an installation we did on a Chevy Silverado 1500. We installed under-glow, grill and wheel well lighting.

UPGRADE TO HEAVY DUTY LEDS: The default configuration for this product is built on our popular high performance LOW PROFILE LED LIGHT STRIPS. They are the primary light strip we use for light kits mounted on vehicles that are driven on public roads and highway. If you take your truck off-road, we suggest upgrading to the optional Heavy Duty LED strip upgrade offered on this product page. Our HEAVY DUTY LED STRIPS are designed to be used in tough outdoor or off-road use where the light strip might be subject to direct impact from rocks or heavy road debris. The flexible PVC on these Heavy Duty LED strips provides an extra, dual layer of protection above and beyond our already tough LOW PROFILE LED light strips.

BRAND: Select the BRAND of your Pickup Truck from the available drop down options. If your brand doesn't appear in the list, select OTHER and you'll be prompted to type in your truck's brand.

Dual Color On/Off/On with relay (hard wired): This option is available for any dual color selection. It's a simple three position on/off/on switch with relay. For example, UP = Amber. Down = Red. Middle postion = Off.

Multi-Color RGBx Single Zone and Dual Zone: For the two multi-color LED options, this kit offers both SINGLE ZONE and DUAL ZONE controller options. As the names suggest, a Single Zone controller has just one single lighting zone. All LEDs wired to the controller are on one zone. Whatever color or feature set you apply will be what you get on all leds. Pretty simple. With our Dual Zone controller, you can set up and operate two distinct lighting zones which can be operated and controlled individually or together. On a Dual Zone controller each lighting zone is capable of supporting up to 1500 LEDs for a total of 3000 LEDs. It will work with your Android® or iOS® Smart phone. It will also work with the included M7 Style RF wireless remote. Scroll down for details on this controller option.

Easy order Under-Glow LED Light kit for your pickup truck! The closest you'll come to a custom fit without bringing your truck to Boogey Lights HQ.

WHEEL WELL LIGHTS: If you want to light up the wheel wells of your truck, select yes from the drop down. The default is no.

RGBW is a new LED strip format Boogey Lights® developed. It is available in both our Low Profile and Heavy Duty LED strip formats. The RGBW led strip includes our core RGB tri-chip technology using a 5050 RGB LED with the addition of a fourth 2835 diode that is WARM WHITE with a 2400 kelvin temperature. This Warm White LED chip provides a softer color white that is commonly referred to as a 'candle white' or 'soft white'. Then, for those who want the flexibility to be able to display up to 16 million color combinations using the RGB tri-chip, they can do that too. RGB + W provides the best of both worlds. Single color warm white plus RGB tri-chip multi-color. The product photo carousel of this product page includes a close-up view of the LED strip design and wiring diagram. Note that due to the addition of that fourth diode, the RGBW strips are a little wider than our standard tri-chip RGB and single color LED strips.  Also, the power lead wires use five conductor vs four. For additional information including product specs, click the SPECS navigation tab on this product page.

The LED Controllers offered in this kit are our GEN2 Single Zone and Dual Zone Heavy Duty Bluetooth COMBO LED Controllers. COMBO means they can be operated using either the included M7 RF wireless hand held remote OR your Bluetooth enable smart phone (and our free APP). Both will work. The RGB version is capable of displaying 16 million different color combinations. The GEN2 RGBx version can display even more color combinations depending on the type of LED strips connected to them. In addition, lighting effects on the Bluetooth controller are significantly more controllable in terms of speed and intensity. Each color and lighting effect is controlled by "sliders" or a color square on your smart phone screen so you can adjust the speed and intensity to get the lighting the way you want it.

This light kit is offered in eight single color options, seven dual-color options and in two multi-color configurations. Detail are as follows:

All of our installation documentation for this product (and all others) is available to download directly from our website. We encourage you to download this information and review before placing your order. That way you'll have a solid understanding of what is required (and no surprises). Here are some of the most important installation documents for this product. You will find ALL available documentation in our INSTALLATION RESOURCES SECTION.

IMPORTANT. You must have an understanding of 12vdc power. An essential skill with installation of any Boogey Lights LED products is knowing how to correctly wire the product to a 12vdc circuit. This includes understanding the importance of having a properly sized fuse at the power source, polarity, how to properly seal an electrical connection, using properly sized wire gauge for the load, measuring voltage and measuring the additional amperage draw you're adding. If you are uncertain or unfamiliar with any of these concepts, we urge you to ask someone who has the knowledge to assist you. Electricity is unforgiving.

We encourage customers to review the information we have assembled here before making your purchase decision. Our lighting systems are the best in the world but they also offer more options. features and flexibility than anything else. It's important to read the product details to achieve the look you want. Be sure to scroll down, expand each text group section and read the information presented. We think you'll find it's very thorough.

This kit is offered in multi-color RGB, RGBA, RGBW, Dual Color (your choice of 7 primary colors + amber) and single color (8 choices) configurations. With our GEN2 RGBx multi-color controller, you can set the color of your choice or pre-program a sequence of colors as well as single zone or dual zone strobbing and flashing capabilities. We offer complete customization capabilities too for those unique situations. Below is an overview of all product options offered.

This product is built on our popular high performance LOW PROFILE LED LIGHT STRIPS. They are the primary light strip we use for light kits mounted on vehicles that are driven on public roads and highway. If you take your truck off-road, we suggest selecting the optional Heavy Duty LED strip upgrade offered on this product page. Our HEAVY DUTY LED STRIPS are designed to be used in tough outdoor or off-road use where the light strip might be subject to direct impact from rocks or heavy road debris. The flexible PVC on these Heavy Duty LED strips provides an extra, dual layer of protection above and beyond our already tough LOW PROFILE LED light strips. If you want to see what both the LOW PROFILE and HEAVY DUTY LED strips look like, click on the button below.  We have close up photos of both. You can also click on the SPECS navigation tab on this product page for detailed product specifications.

For many under-glow installations we do here at BOOGEY HQ, we have to install plastic or aluminum flat stock in some locations on the bottom of the truck. This is because the LED strip needs to be mounted on a flat, single contiguous mounting surface and in a straight line (the led strip cannot bend around corners or be bent on a horizontal plane). Also, the entire strip must be stuck to the mounting surface and not span across mounting surfaces. If you don't have a smooth, flat, contiguous mounting surface we suggest riveting or screwing 1.5" wide plastic or aluminum flat stock to the surface and then mount the LED strip to that flat stock. While we offer both aluminum and plastic flat stock for sale here on our website, you can usually purchase similiar material locally for less.

MULTI COLOR RGB, RGBA or RGBW: The multi-color RGB LED version provides over 16 million color combinations using the Boogey Lights LED Controller. The RGBA version offers the same color combinations as RGB except there is an additional diode in the chip which is AMBER. The multi-color RGB, RGBA and RGBW kits include our GEN2 Heavy Duty combo Bluetooth + RF controller so you can control the lights with your Bluetooth enabled smartphone or the included wireless RF G2 M7 remote control. See details about this controller in the above CONTROLLER CONFIGURATION section.

Single Color Flasher (+ Strobing + Solid On) with Dual Zone control:  This is a dual zone flasher controller that offers three modes for single color lights: solid on, 3 burst flash and strobing. Both the flashing and strobing modes have 5 different speed settings. There's also 5 brightness levels. It's controlled by a hand held RF wireless remote (see photo in the photo carousel above). Because it's a dual zone controller, each zone can be operated individually (e.g. zone 1 = red, zone 2 = amber) or they can be operated together. This flasher controller includes our 'Quick Switch' feature that allows you to wire in a toggle switch (e.g. on the dash) to turn the lights on (or off) in the last used settings. This Quick Switch feature is zone specific. This flasher will work with both single color and dual-color LEDs. Scroll down for details on this controller option.

WHEELBASE (in inches): Select the wheelbase (in inches) of your pickup truck from the available range of options in the drop down box. These measurements are in inches. This is super important to be correct. Do not guess at the wheelbase measurement of your truck. We strongly suggest either measuring it yourself OR looking at the information printed on driver's side door jamb where the WHEELBASE (WB) will be printed. We know too the temptation will be there to do an online search for the wheelbase of your specific truck. Don't. Why? Because the online wheelbase measurements you'll find require you to know the type of cab you have (e.g. standard, extended, crew, super crew, extended crew, etc.) Different manufacturers use different names for the cab configuration and it's easy to get confused. Because the wheelbase measurement is critical for the correct fit of your light kit, we suggest taking the measurement yourself (or looking on the driver's side door jamb).

Note: Any auto parts store (or big box store) will offer a wide variety of 12vdc switches and relays. And, many trucks already have unused switches available on the dash. We offer the above as a convenience only.

We're passionate about motorsport and performance in all its forms and are constantly looking for new ways to connect drivers, fans and the businesses who support them.

MODEL: Select the MODEL of your Pickup Truck from the available drop down options. If your truck's model namedoesn't appear in the list, select OTHER and you'll be prompted to type in your truck's model.

BED LIGHTS: Do you want to light up your truck's bed? If so, select yes from the drop down. The default is no. If you answer yes, you'll be presented with two additional options. One is for the length of your truck bed. The default length is 5.5' (short bed). The other is the LED color. The default LED color is white. You'll also be presented with a list of Bed Light switching devices. Note that the bed light kit is a separate kit from the Under-Glow. It is designed to be a stand alone light kit just for the bed of the truck. It operates independently from the Under-Glow kit. If for example you order the RGB multi-color version of the bed light kit, you'll receive a separate LED controller just for the bed lights.

No two installation scenarios are the same. Not everyone shares the same installation quality goals. Some folks are OK with twisting wires together, others want to solder them. Some folks are OK with running wires where they may be seen or unprotected to save money/time, others want a tidy, clean install without any wires showing. Some folks are OK with mounting their LED strips to whatever surface they can find, others want to take the time necessary to build out appropriate mounting surfaces to provide the best lighting effect on their vehicle. The point is it's not possible to provide all the materials necessary for all installation scenarios and quality goals. Our light kits provide the essential components needed for a high-quality, functioning lighting system. Installation of our light kit to your specific vehicle may however require additional items to make it look and fit the way you want. This is particularly the case with electrical wiring and mounting of LED strips. Before proceeding with your installation we suggest you consider THESE OTHER ITEMS.

Designed primarily for commercial, working truck applications this heavy duty LED controller is ideal for situations where you need to strob or flash large numbers of single color LEDs. A typical scenario is with wide load truck haulers, wreckers and tow trucks. The unique dual zone capability allows the lights to be segregated into two distinct lighting zones. For example zone one might be red LEDs and zone two amber LEDs. Another option could be to assign the two zones into LEDs mounted on different parts of the truck (underglow = white, grill lighting = amber). The options are endless. Each zone can be operated independently or together. In addition to ON/OFF control, STROBING and FLASHING, there's a STEADY-ON mode that offers dimming making it ideal for recreational vehicle applications as well. All of these features are operated using the included wireless RF handheld remote. Each zone will support up to 1500 tri-chip 5050 LEDs which means a total of 3000 tri-chip LEDs on a single LED controller. The operating modes include strobing, 3 burst flash and solid on. The speed can be adjusted and there's a brightness setting too. All of these features are operated using the included wireless RF hand held remote. This controller includes our Quick-Switch feature which when paired with a simple on/off switch will allow the controller to be turned on/off via a hard wired switch (mounted on the dash for example) as well.

SINGLE COLOR: Each single color LED chip has 3 diodes inside which means single color LEDs are the brightest available since all three diodes are the same color. The AMBER Single Color LED chip is DOT compliant. The available single color LEDs are: red, green, blue, amber, orange, white, pink and magenta (hot purple).

Dual Color Flasher (+ Strobing + Solid On) with Dual Zone control: This is a dual zone flasher controller that offers three modes for dual color lights: solid on, 3 burst flash and strobing. Both the flashing and strobing modes have 5 different speed settings. There's also 5 brightness levels. It's controlled by a hand held RF wireless remote (see photo in the photo carousel above). Because it's a dual zone controller, each zone can be operated individually (e.g. zone 1 = red, zone 2 = amber) or they can be operated together. This flasher controller includes our 'Quick Switch' feature that allows you to wire in a toggle switch (e.g. on the dash) to turn the lights on (or off) in the last used settings. This Quick Switch feature is zone specific. This flasher will work with both single color and dual-color LEDs. Scroll down for details on this controller option.

We've made this product highly configurable to fit just about any style of pickup truck. Assuming the information on the wheelbase and body style is accurate the light kit you'll receive will provide full perimeter under-glow lighting for your pickup truck. It is however impossible to provide a custom fit light kit without a) examining the bottom of your truck and b) getting precise measurements of the possible mounting locations of your truck in advance. In addition, if your truck has running boards you may want to use those running boards as a mounting location for the side under-glow light strips instead of the body. Those running boards often have less room to mount the LED strips. For this reason you may need to trim some of the LED strips to fit your specific truck. We include instructions with each kit how to do this as well as the heat shrink necessary to properly seal any strips that need to be cut. To minimize the cutting of LED strips, we generally provide a larger quantity of shorter LED strips that can be mounted on just about any flat surface making it easier to install. Each light kit has it's own CUT SHEET included which details the layout for your specific truck.

Single Color On/Off with relay (wireless): This option is available for any single color selection. It's a simple on/off wireless switch with relay. Includes two keyfobs with a simple on and off button. See photo in product photo carousel.

Single color LEDs do not require an LED controller to operate. They do however require a switch of some kind somewhere in the circuit to turn them off/on. We offer a number of options in this kit for switching single color LEDs. There are a number of ways to do this but regardless of how you decide to switch your single color LEDs, you need to be mindful of the amperage you're adding to your system. If you're considering adding these LEDs to an existing circuit (e.g. with your marker or running lights) we strongly suggest using a relay vs simply tapping into the existing circuit. This is especially important on newer trucks where the LCM will likely throw an error when you add more LEDs to the system due to the increased amperage draw. If you're looking for some single color switch options - including relays - here are several:

As the name suggests, a SINGLE ZONE controller has one lighting zone. All LEDs wired to that zone display the same color and features. For DUAL ZONE, there are two distinct light zones. All LEDs wired to Zone 1 operate the same. All LEDs wired to Zone 2 operate the same. Each zone can be used independently or together.

CONTROLLER CONFIGURATION: This option is required for any RGB, RGBA or RGBW color selection. In addition there are options for both single color and dual-color LED selections. There is a detailed discussion about these options further down on this product page. It's important to read it.