This guide looks at all the ones that you will see in your theory test – but if you have any questions, then let us know in the comments below.

Slipperywhen wetroadsign meaning

FS77 BUG GUARD/FLOOR SWEEP-CL. STOCK LENGTHS 4',8'. Add To Cart. This item is subject to additional shipping charges for large packages based on the lengths ...

This sign appears in a red triangle with arrows at the top and bottom, and features two measurements. The equivalent imperial and metric measurements let drivers know that vehicles over a certain height should avoid a route – the signs should appear well in advance of the bridge or restriction up ahead.

The safer you are, the more you can potentially save on new driver insurance too, so it actually pays to know your road signs. Let’s start with the basics.

The sign is often accompanied by a plate reading “For X miles” to prepare you for the full length of a tricky road. Show caution, as traffic authorities are encouraged to use these signs sparingly so their message isn’t undermined.

You’ll also see the sign as you leave a local speed zone. Look out for the words ‘ZONE ENDS’ and a diagonal stripe through the speed limit zone you’re leaving.

You might notice a very similar sign on your travels, with arrows at the left and right. These indicate that vehicles over a certain width should avoid a narrow route.

Slippery roadmeaning

The ‘dual carriageway ends’ sign appears in a red triangle. It shows two carriageways coming together to indicate two-way traffic will continue ahead on a single carriageway road.

Another warning sign in a red triangle, these are used to alert drivers of hills on the road ahead. Steep hills downward show a decline to the right of the sign, while steep hills upward show an incline to the right of the sign.

“The sign indicates that the road may be slippery. The sign is only used if there are specific reasons to warn of a slippery surface due to snow or ice.” (Traffic Sign Ordinance)

Drivers of larger vehicles should look out for signposted diversions once they see the triangular warning sign before they get confronted by the circular restriction sign.

Slippery roadsign in car

This is one of the most commonly misunderstood signs, and many drivers have fallen foul of the law by parking on a clearway.

A red cross over a blue background indicates a clearway, which means you’re not allowed to stop – not even to set down or pick up passengers.

If you see a triangular sign with a row of cars on it, it’s warning you that you’re approaching a congested area, so be prepared to stop.

You’ll commonly see this sign when a road or bridge becomes very narrow, or as part of traffic calming measures where there is only room for one vehicle to pass. If there’s another vehicle travelling towards you that is already in the narrow area, wait for it to pass.

KC HiLiTES 6 Inch Hard Plastic Cover - Round - Pair - Yellow, Black KC Daylighter Logo.

Road hump signs show a humped surface in a red warning triangle. They can be used to indicate a single road hump or a series of humps. The signs must be used with a second plate to indicate the distance road humps cover on a road, or the distance to a road hump.

A T-junction is a place where a minor road joins a major one without crossing it, forming the shape of the letter T. The T-junction sign is often placed in busy areas to warn you to be careful as vehicles may be stopping to turn. It can be particularly useful if you’re driving on dark roads at night to let you know you’re approaching a busy junction.

Slippery roadsign meaning

A sign showing the silhouette of an adult and child holding hands lets drivers know that pedestrians might be present on the road ahead. Like other warning signs it appears in a red triangle.

Driving in stop-start traffic could potentially cause your engine to overheat, so it’s always advisable to have breakdown cover just in case.

Slippery roadsign photo

There are several reasons why you might see this sign – it is often displayed when the road has poor visibility or if it’s too narrow for safe overtaking.

The percentage shown refers to the tangent of the angle ahead and is sometimes expressed as a ratio on older signs. You may find that the gradient of a hill becomes steeper as you drive so look out for new signs at all times.

Gravelroadsign

There are hundreds of different road signs, each with their own meaning. However, most fall into one of three categories based on their shape. The general rule is:

China Others Smart Solar Garden Light 6-12w catalog of IP65 Waterproof Solar LED Wall Light, 3 Years Warranty 12W Solar Street Garden LED Wall Lamp provided ...

The FireTech Heated LED Headlights utilize a heated glass lens, which is around 7x more thermally conductive than polycarbonate or other plastics. This allows ...

Sometimes you’ll see a red triangular sign with two black arrows pointing in opposite directions. These are used to make you aware that you’re about to leave a separated one-way street and enter a two-way road.

*Max 50% applies to new Complete cover for 1 person. Ends 01/11, 4pm. †At least 10% of new customers paid this or less since 12/08. Comparison based on theaa.com closest equivalent cover at 25/10.

When you see a rectangular blue sign with a large white arrow and small red arrow pointing in opposite directions, it means you have priority over vehicles travelling from the other way. Drivers are often confused by this as it’s not always clear who has right of way.

Red: Red generally means stop. The use of red on signs is limited to stop, yield, and prohibition signs. White: A white background indicates a regulatory sign.

There are two types of Give Way sign – either with distance in yards to the junction under the sign, or with the words written in the middle of the sign.

It’s important to reduce your speed when driving over humps. Some motorists are tempted to speed up between them, but such erratic driving can lead to premature damage to brake pads and suspension.

*Max 50% applies to new Complete cover for 1 person. Ends 01/11, 4pm. †At least 10% of new customers paid this or less since 12/08. Comparison based on theaa.com closest equivalent cover at 25/10.

In some instances, restrictions may only apply at certain times of the day. You tend to see this sign on major commuter roads, such as Red Routes, or outside schools.

Similarly, the National Heavy Vehicle Regulator will recognise the WA road train signage for vehicles entering into South Australia. The Northern Territory ...

Dead end or ‘no through road’ signs are easily recognised by their horizontal red stripe sat on top of a vertical white stripe. The t-shape appears on a blue background.

A white circular sign with a single black diagonal stripe through it tells you that the national speed limit applies on the upcoming stretch of road. It supersedes any previous speed limit signs you may have had to adhere to, such as passing through temporary roadworks. But what are the national speed limits?

This sign means that you must not drive any motor vehicle down a road where this is displayed. It could be that the area is reserved for pedestrians and cyclists only.

It will often appear with the word ‘ZONE’ written underneath with a local authority-selected image, to show you’re entering a local speed zone.

Or to give this sign it's full title: ‘area in which cameras are used to enforce traffic regulations’ sign. These will often appear with national speed limit signs and maximum speed signs.

Knight Rider Flexible Strips and 22" Light Bar. We can't find products matching the selection. Sign Up For Newsletter Subscribe Follow Us About Racesport

Many drivers believe an exclamation mark in a red triangle is solely used to warn of a hidden dip in the road. However, the sign can indicate any temporary and permanent hazards that aren’t easily represented using symbols.

These Explosive Symbol Signs are made from a high quality Polymeric calendared vinyl suitable for internal and outdoor use.

A black camera symbol appears on a white background on sections of road covered by speed cameras and average speed cameras.

SlipperyWhen Wetroadsign

It’s especially important if you’re recently passed your test, as you won’t have direct experience of every different type of road layout.

You should keep to the left-hand side of the road and be aware of oncoming traffic. If they’re horizontal, it indicates that you’ll have to turn either left or right to join the two-way road ahead.

These low clearance signs are also used in red circles, usually on the low bridge itself or a short distance ahead of it:

The T-junction sign shouldn’t be confused with the ‘no through road’ sign, which is a blue square with a red and white T shape on it.

‘No waiting’ signs are easily confused with ‘no stopping’ signs. Rather than displaying a red cross they feature a single diagonal red stripe on the same blue background.

The queues ahead might be hidden, so make sure you’re aware of vehicles behind you that could be following too closely. If you brake sharply they could run into the back of you, so when you see the sign, start slowing down gradually and brake smoothly.

It also warns you when there’s a high risk of vehicles pulling out from parking spaces or driveways that would increase the risk of a head-on collision.

This triangular sign is one of the most frequently seen on UK roads and is used to warn you of a junction ahead. Traffic on the road you will be joining has priority, so you must wait for a safe gap before continuing.

Of course, even when the national speed limit applies, it might not always be safe to drive at that speed, so use your common sense on this.

A new gem in the Tigard/Metzger area, nestled in the heart of Tigard near the corner of Locust St and Hall Blvd. Unwind with friends over a game of pool or ...

202243 — The best outdoor lights for moonlighting are those that are subtle and elegant. The point of moonlighting is to recreate the soft lighting that ...

The signs are almost always used alongside (or within) rectangular yellow signs which show details of enforcement hours.

This ‘bottleneck’ sign looks very similar to the ‘dual carriageway ends’ sign, except for one key difference; the vertical lines remain separate despite coming closer together.

If you want to pass your theory test, it's a good idea to learn what each road marking means with an interactive app. Driving Theory Test UK is a great place to start, with all necessary learning materials, hazard perception clips and Highway Code info included. You can download it here:

Slippery roadsign drawing

This no motor vehicles sign showing a motorbike over a car is sometimes misunderstood to mean only cars and motorcycles are permitted. Nor does it mean motorcycle stunts aren’t allowed - you can be reasonably confident that they aren’t anyway!

One of the most common road signs you’ll encounter – it displays the maximum speed permitted on a road within a red circle.

Running a car isn’t cheap, but there are some easy things you can do to keep your costs down. Get these tips and more useful driving articles sent straight to your inbox now.

You’ll notice that the triangle is upside down compared with other warning signs. That’s so it can still be recognised if it gets defaced by snow, for example.