In-street pedestrian crossing signs (MUTCD R1-6 or R1-6a) are placed within the roadway, either between travel lanes or in a median. The sign may be used to remind road users of laws regarding right-of-way at an unsignalized pedestrian crossing. The legends “STOP FOR” or “YIELD TO” may be used in conjunction with the appropriate symbol. This countermeasure is used with other crosswalk visibility enhancements to indicate optimal or preferred locations for people to cross and to help reinforce the driver requirement to yield the right-of-way to pedestrians at crossing locations.

Brightest LED Mini light bar

For multilane roadway crossings where vehicle volumes are in excess of 10,000 AADT (annual average daily traffic), a marked crosswalk alone is typically not enough. These signs may be appropriate on 2-lane or 3-lane roads where speed limits are 30 mph or less.

Give your rig a scale look with our LED Light Bar. This versatile setup works with 5V to 12V DC input and includes all the mounting hardware needed for most 1/10 scale trucks. Perfect for off-road trucks or rock crawlers. This light bar comes stock with a Servo connector to plug directly into any open channel on your receiver. A simple push-button switch toggles between seven different flashing patterns for the LEDs. Specifications: Width: 3.66 in. (93 mm) Height: 0.55 in. (14 mm) Weight: 0.05 lbs Number of LEDs: 12 LED Lead Length: 15 in. (381 mm) Connector Type: Servo connector Kit Includes: 1 x Light Bar 2 x Body Mounts 6 x Screws 6 x Nuts

Image

Blueemergency Light Bar

Image

Give your rig a scale look with our LED Light Bar. This versatile setup works with 5V to 12V DC input and includes all the mounting hardware needed for most 1/10 scale trucks. Perfect for off-road trucks or rock crawlers. This light bar comes stock with a Servo connector to plug directly into any open channel on your receiver. A simple push-button switch toggles between seven different flashing patterns for the LEDs. Specifications: Width: 3.66 in. (93 mm) Height: 0.55 in. (14 mm) Weight: 0.05 lbs Number of LEDs: 12 LED Lead Length: 15 in. (381 mm) Connector Type: Servo connector Kit Includes: 1 x Light Bar 2 x Body Mounts 6 x Screws 6 x Nuts

Image