This placard indicates a long commercial vehicle, which is a double trailer and can be up to 40 metres in length. It is important to be able to recognize an LCV on the highway, based on rear signage, and anticipate both extended length and limited speed when preparing to pass one on the highway.

These signs, above the road or on the pavement before an intersection, tell drivers the direction they must travel. For example: the driver in lane one must turn left; the driver in lane two must turn left or go straight ahead; and the driver in lane three must turn right.

The share the road sign is used to warn motorists that they are to provide safe space on the road for cyclists and other vehicles.

Do not stand in the area between the signs. This means you may not stop your vehicle in this area except while loading or unloading passengers. (Used in pairs or groups.)

Fisher plowLight lens

Indicates areas where the community has identified that there is a special risk to pedestrians. Traffic related offences committed within the zone are subject to increased fines.

Indicates that an upcoming structure might not allow room for a tall vehicle; therefore, drivers of such vehicles should choose an alternate route.

Pavement has been milled or grooved. Your vehicle's stopping ability may be affected so obey the speed limit and drive with extra caution. Motorcyclists may experience reduced traction on these surfaces.

Only public vehicles such as buses, or passenger vehicles carrying a specified minimum number of passengers, may use this lane.

Two roads going in the same direction are about to join into one. Drivers on both roads are equally responsible for seeing that traffic merges smoothly and safely.

Watch for these signs when driving in designated bilingual areas. Read the messages in the language you understand best. Bilingual messages may be together on the same sign or separate, with an English sign immediately followed by a French sign.

In addition to flags, vehicles and/or loads must display on the front of the vehicle and the rear of the load, in a clearly visible position, either one of the two following signs: a sign visible for a distance of at least 150 metres bearing the words “OVERSIZE LOAD” in black letters at least 200 millimetres high on a yellow background; or, a “D” sign, as illustrated. When travelling at night, the sign must be made of high-intensity, retro-reflective material. The sign cannot obstruct lights or other safety devices on the vehicle or trailer; and it must be removed or covered when not in use.

Some information signs include a numbering system along the bottom of the sign to assist emergency vehicles and drivers in determining an appropriate route.

Do not stop in the area between the signs. This means you may not stop your vehicle in this area, even for a moment. (Used in pairs or groups.)

The “slow-moving vehicle” sign is an orange triangle with a red border. It alerts other drivers that this vehicle will be travelling at 40 km/h or less. When on a road, farm tractors, farm implements/machinery and vehicles not capable of sustaining speeds over 40 km/h must display the slow moving vehicle sign. Watch for these slow moving vehicles and reduce your speed as necessary.

FisherINTENSIFIREplow lights

These signs warn of unusual temporary conditions such as road work zones, diversions, detours, lane closures or traffic-control people on the road. They are usually diamond-shaped with an orange background and black letters or symbols.

Divided highway begins: traffic travels in both directions on separated roads ahead. Keep to the right-hand road. Each road carries one way traffic.

Freeway interchanges or exits have numbers that correspond to the distance from the beginning of the freeway. For example, interchange number 204 on Highway 401 is 204 kilometres from Windsor, where the freeway begins. Distances can be calculated by subtracting one interchange number from another.

Fisherplows

Sharp turn or bend in the road in the direction of the arrow. The checkerboard border warns of danger. Slow down; be careful.

Truck entrance on the right side of the road ahead. If the sign shows the truck on the left, the entrance is on the left side of the road.

This sign reserves curb area for vehicles displaying a valid Accessible Person Parking Permit picking up and dropping off passengers with disabilities.

When transporting dangerous goods, safety marks, placards or labels are displayed to identify dangerous-goods classification and the nature of danger they pose. They are an information tool to provide a quick identification that can be found on trucks, cargo and even pallets.

A stop sign is eight-sided and has a red background and white letters. It means you must come to a complete stop. Stop at the stop line if it is marked on the pavement. If there is no stop line, stop at the crosswalk. If there is no crosswalk, stop at the edge of the sidewalk. If there is no sidewalk, stop at the edge of the intersection. Wait until the way is clear before entering the intersection.

These signs tell you about distances and destinations. They are usually rectangular with a green background and white letters. Other signs with different colours guide you to facilities, services and attractions.

These signs give a direction that must be obeyed. They are usually rectangular or square with a white or black background and black, white or coloured letters. A sign with a green circle means you may or must do the activity shown inside the ring. A red circle with a line through it means the activity shown is not allowed.

Fisher Plowparts

This sign on the back of transit buses serves as a reminder to motorists of the law requiring vehicles approaching a bus stopped at a dedicated Bus Stop to yield to the bus, once the bus has signalled its intent to return to the lane.

Lightweight snowplow

This sign warns you that you are coming to a hidden school bus stop. Slow down, drive with extra caution, watch for children and for a school bus with flashing red lights.

These signs warn of a school crossing. Watch for children and follow the directions of the crossing guard or school safety patroller.

The speed limit in this zone is lower during school hours. Observe the speed limit shown when the yellow lights are flashing.

These signs mean lanes are only for specific types of vehicles, either all the time or during certain hours. Different symbols are used for the different types of vehicles. They include: buses, taxis, vehicles with three or more people and bicycles.

EDR signs are used during the unscheduled closure of a provincial highway when OPP detour all traffic off the highway. The EDR markers are located along alternative routes and provide direction to motorists around the closure and back onto the highway.

Fisher plowHeadlight bulb

Various exit signs are used on freeways. In urban areas, many exit ramps have more than one lane. Overhead and ground-mounted signs help drivers choose the correct lane to exit or stay on the freeway.

FISHERV-plow Mount

Vehicles and/or loads in excess of dimensions prescribed under Section 109 of the Highway Traffic Act must be marked with bright red or orange warning flags, which are at least 40 cm square, mounted to the extremities of the vehicle or load. The flag(s) must be kept in good and clean condition so as to not diminish their effectiveness.

Roundabout ahead. Reduce speed. The counter-clockwise arrows show the direction of vehicle traffic within the roundabout.

The Ministry of Transportation strives to be a world leader in moving people and goods safely, efficiently and sustainably to support a globally competitive economy and a high quality of life.

These signs change according to traffic conditions to give drivers current information on delays and lane closures ahead.

FisherHTplowreviews

This sign is installed on multi-lane highways with no centre median divider. It informs drivers approaching from both directions that they must stop for a school bus when its signal lights are flashing.

Indicates an upcoming fire truck entrance on the right and vehicles should be aware of fire trucks entering the roadway.

Traffic signs give you important information about the law, warn you about dangerous conditions and help you find your way. Signs use different symbols, colours and shapes for easy identification.

A railway crossing sign is X-shaped with a white background and red outline. It warns that railway tracks cross the road. Watch for this sign. Slow down and look both ways for trains. Be prepared to stop.

Sometimes one or more lanes may lead off the freeway. The arrows matching the exit lanes are shown on the advance sign in a yellow box with the word 'exit' under them.

Do not park in the area between the signs. This means you may not stop your vehicle except to load or unload passengers or merchandise. (Used in pairs or groups.)

A yield sign is a triangle with a white background and a red border. It means you must let traffic in the intersection or close to it go first. Stop if necessary and go only when the way is clear.

A school zone sign is five-sided and has a fluorescent yellow/green background with black symbols. It warns that you are coming to a school zone. Slow down, drive with extra caution and watch for children.

These signs warn of dangerous or unusual conditions ahead such as a curve, turn, dip or sideroad. They are usually diamond-shaped and have a yellow background with black letters or symbols.